Samsung 5000W Owners Instructions - Page 26

Selecting the Cassette Type GB ** USER SET1 ** ¨ TAPE SELECT CLOCK TYPE PLAY SYSTEM OSD USER SET2 :E180/ T120 :12H :AUTO :ON ¹ ¨ END:(MENU) If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted. 1 Press MENU on the remote control. Result: The programming menu is displayed. 2 Press the or button, until the cursor is placed in front of the USER SET option. 3 Press the button to select this option. Result: The cursor is set to the TAPE SELECT option. 4 Press the or button as many times as required, until the correct cassette length is displayed. E180/T120 E240/T160 E 300 E260/T180 5 Press MENU twice to exit the menu. Selecting the Recording Speed Type Recording Time PAL/ SECAM NTSC E-180/T120 180 mins 120 mins E-240/T160 240 mins 160 mins E-260/T180 E-300 260 mins 300 mins 180 mins NDEX REC.SPEED CLK/COUNT PICTURE TIMER STROBE AUDIO 123 ART INPUT 456 You can record a cassette at two different speeds: PAL/SECAM/MESECAM NTSC/PAL-M x SP (Standard Play) x LP (Long Play) x SP (Standard Play) x SLP (Super Long Play) In Long Play or Super Long Play modes: x the recording is of a slightly lower quality. To record a cassette: in standard play mode in long play mode in super long play mode Press the REC.SPEED button on the remote control, until: SP is displayed. LP is displayed (PAL/SECAM/MESECAM). SLP is displayed (NTSC/PAL-M). Protecting a Recorded Cassette Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. 1 If you wish to protect a cassette, break off the tab using a small screwdriver. 1 2 To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape. 22