Samsung 5000W Owners Instructions - Page 45
TV System Conversion, Playback Conversion
UPC - 036725350007
View all Samsung 5000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
TV System Conversion You can convert the input signal into the desired TV system. 1 Connect the RCA audio/video cable into the LINE 1 IN jacks on the front of the VCR. 2 Press the INPUT SYSTEM button on remote control to select the input signal. (Initial mode is AUTO) x When the Auto mode is selected, the input signal is automatically identified. x When the input signal is not automatically identified, select the corresponding input system. 3 If you wish to convert the NTSC TV system into the PAL system, select AUTO or NTSC system with the INPUT SYSTEM button on remote control. Result: The display panel shows the NTSC input signal and the NTSC output signal. x If the input signal does not correspond to the input button on the VCR, an abnormal signal is outputted. 4 Press the PAL output system button on the VCR. Result: The display panel shows the NTSC input signal and the PAL output signal, and the NTSC signal is converted into the PAL signal for output. 2 INPUT SYSTEM OK 4 GB O S Playback Conversion You can perform playback conversion of the signal recorded on the tape into the appropriate format for the country. 1 If you wish to convert a PAL system tape into the NTSC system for playback, then press the NTSC output button on the VCR. Result: The display panel shows NTSC output signal. 2 Insert the video tape into the VCR. x is shown on the display panel. x A video tape without the record protect (safety) tab intact will play back automatically. 3 Press the PLAY ( ) button. Result: The TV system recorded on the tape is automatically read, and the PAL signal is converted into the NTSC signal for playback. 1 3 41