Samsung BD-E5400 User Manual Ver.1.0 (English) - Page 16
Appendix - problems
View all Samsung BD-E5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Playlist Playing Photo Contents 1. To move to the Music List, press the 5 or RETURN button. The Music List screen appears. Music TRACK 001 TRACK 001 02:38 TRACK 001 02:38 TRACK 001 02:38 TRACK 001 02:38 TRACK 001 02:38 CD 1/2 Page TRACK 001 02:38 TRACK 001 02:38 TRACK 001 02:38 TRACK 001 02:38 TRACK 001 02:38 c Select ( ) Jump Page ' Return 2. Press the buttons to move to a desired track, and then press the YELLOW (C) button. A check appears on the track. Repeat this procedure to select additional tracks. 3. To remove a track from the list, move to the track, and then press the YELLOW (C) button again. The check on the track is cancelled. 4. When done, press the v button. 5. To go to the Music List, press the RETURN button. ✎✎ NOTE `` You can create a playlist with up to 99 tracks on Audio CDs (CD-DA). You can play photo contents located on a DVD, CD, or a USB storage device. Using the Tools Menu During playback, press the TOOLS button. Slide Show Select to start the slide show. Background Music Select to listen to music while viewing a slide show. Zoom Select to enlarge the current picture. (Enlarge up to 4 times) Rotate Select to rotate the picture. (This will rotate the picture either clockwise or counter clockwise.) Information Shows the picture information. ✎✎ NOTE `` Depending on the disc or storage device, the Tools menu may differ. `` To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo, and the encoding method. `` You can't enlarge the subtitle and PG graphic in the full screen mode. Appendix Troubleshooting Before requesting service, please try the following solutions. PROBLEM No operation can be performed with the remote control. SOLUTION • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. Disc does not play. • Ensure that the disc is installed with the label side facing up. • Check the region number of the Blu-ray Disc/DVD. Disc Menu does not appear. • Ensure that the disc has disc menus. The prohibition message appears on the screen. • This message appears when an invalid button is pressed. • The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles). • You've requested a title or chapter number or search time that is out of range. Play mode differs from the Setup Menu selection. • Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function. The screen ratio cannot be changed. • The Screen Ratio is fixed on your Blu-ray Disc/DVD. • This is not a problem with the player. No audio. • Make sure you have selected the correct Digital Output in the Audio Options Menu. The screen is blank. • If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV. • Press the @ button (on front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. • When the factory default settings are restored, all stored user BD data is deleted. 16