Samsung HG40NB670FF Installation Guide Ver.1.0 (English) - Page 18

¦¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Menu Hospitality Mode SI Vendor Power On Channel Menu OSD Item Hospitality Mode SI Vendor Power On Channel EN Power On Channel Channel Type Power On Volume EN Power On Volume Min Volume Max Volume Panel Button Lock Power On Source Power On Option Channel Setup Channel Editor Channel Bank Editor Dynamic SI Picture Menu Lock Menu Display initial Value Standalone Samsung Last Saved 3 ... Last Saved ... 0 100 Unlock TV Last Option ON OFF ON Description Select Hospitality mode. yy Interactive mode : TV works with an SI STB or SBB. yy Stand-alone mode : TV works alone, without an SI STB or SBB. yy Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal / Guestek / Seachange / EBL yy Stand-alone mode : OFF / Smoovie Set the default values that will be applied when the TV is turned on. yy User Defined : Lets you set Power On Channel and Channel Type manually. See Power On Channel and Channel Type below. yy Last Saved : If you select this item, when the TV is turned on, it displays the channel it was displaying when it was turned off. When the TV is turned on, it switches automatically to this channel. yy Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital cable band). yy User Defined : Lets you set the Power On Volume manually. See Power On Volume below. yy Last Saved : When the TV is turned on, it returns to the volume that had been set when the power had been turned off. The TV turns on with this Volume Level in Stand Alone Hospitality mode. The minimum Volume Level the user can set in Stand Alone Hospitality mode. The maximum Volume Level the user in Stand Alone Hospitality mode. Turning the front panel (local key) operations on/off. yy Unlock : Unlocks all panel keys. yy Lock : Locks all panel keys. yy Power : Locks all panel buttons except Power. yy Menu/Source : Locks the Menu and Source. Select the input source the TV displays when turns on. Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again. yy LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to Stand- by. If it was on, it turns on. yy Power On : When the power returns, the TV turns on. yy Standby : When the power returns, the TV enters the Standby mode. Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program, Antenna selection, etc. The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: yy Change the channel numbers and names, and sort the channels in your desired channel number order. yy Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen. The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly. If you set Hospitality Mode to Standalone and SI Vendor to Smoovie, this item is displayed. Lets you edit the channel bank that works with the Smoovie Remote. Refer to page 32. yy On : Check the DTV Program channel number. (If Dynamic SI is On, it is not availale to edit DTV channels in Channel Editor.) yy Off : Does not check the DTV Program channel number. (If Dynamic SI is Off, it is available to edit DTV channels in Channel Editor,but additional DTV channel program number update is not supported.) Enable or disable the Picture Menu. yy On : The Main Menu is displayed. yy Off : The Main Menu is not displayed. 18 English [HG670677-ZA]Install Guide-ENG.indd 18 2013-02-25 �� 2:19:23