Samsung HG40NB670FF Installation Guide Ver.1.0 (English) - Page 21
PI AES Data
View all Samsung HG40NB670FF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Menu Service Item CAS Self Diagnosis PI AES Data Self Diagnosis for TV Self Diagnosis for HTV Upgrade Now Service Pattern ATV Cable AGC Gain DTV Cable AGC Gain TV reset initial Value Pro:idiom 0xD279 32GRAY Default Default Description Configures CAS support. Applies to only the NB673, NB677, and NB678 models. OFF : Turns off CAS support. LYNK DRM : Select to turn on S-LYNK DRM CAS support only. Pro:idiom : Select to turn on Pro:Idim CAS support only. LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. Enter Self Diagnosis Menu. yy Picture Test: Use to check for picture problems. If the problem appears in the test picture, select YES, and then follow the directions on the screen. yy Sound Test: Use the built-in melody to check for sound problems. If the problem occurs during the test, select YES, and then follow the directions on the screen. Displays the current state of Pro:Idion AES Lets you check the state of the TV picture and sound. yy Picture Test : Use to check for picture problems. If the problem appears in the test picture, select YES, and then follow the directions on the screen. yy Sound Test : Use to check for sound problems. If the problem occurs during the test, select YES, and then follow the directions on the screen. Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have any problems with the Pro:idiom encryption channel or the communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung Service. Lets you upgrade the TV SW with a USB memory stick. See Page 31. Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu button to turn off the test patterns and exit. Lets you control the AGC gain of the analog cable channels. Don't change the default value unless problems occur. Lets you control the AGC gain of the digital cable channels. Don't change the default value unless problems occur. Returns all settings on the TV to their factory defaults. ✎✎REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for more operating information. [HG670677-ZA]Install Guide-ENG.indd 21 21 English 2013-02-25 �� 2:19:25