Samsung HL-P5685W User Manual (ENGLISH) - Page 26

Operation Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual). English - 26 Selecting the Video Signal Source Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system). 1 Press the MENU button. Press the ... or † button to select "Channel", then press the ENTER button. Input Picture Sound Channel Setup Channel Antenna : Ant.1 Air/CATV : Air Auto Program Add/Delete Favorite Channels Name Fine Tune M More Move Enter Return 2 Press the ... or † button to select "Air/CATV", then press the ENTER button. If you are connected to an antenna, press the ... or † button to select "Air". If you connected cable, press the ... or † button to select the type of cable system: "STD", "HRC" or "IRC". Input Picture Sound Channel Setup Channel Antenna : AntA.1ir Air/CATV : AirSTD Auto Program HRC Add/Delete IRC Favorite Channels Name Fine Tune M More Move Enter Return Press the EXIT button to exit. NOTES • "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory". • Subscription cable services require service-specific requirement for viewing.