Samsung HW-C560S User Manual (user Manual) (ver.1.0) (English) - Page 50

Operation Reset function When the Power is on, 1. Press the MUTE button. • MUTE appears on the display. 2. Press the 9 button five times and then press the ENTER button. • INITIAL : NO appears on the display. 3. Press the ▲▼ buttons to select YES. • The unit will turn off after 5 seconds. SLEEP 7 89 PROLOGIC AUDIO ASSIGN DSP 0 MUTE VOL TUNING ASC /CH TUNER MEMORY SUBWOOFER MO/ST POPUP SETUP/MENU INFO When the Power is Off, 1. Press and hold the MEMORY button on the front of your AV Receiver RETURN EXIT for longer than 5 seconds. • POWER LED will blink one time. M  Using the RESET function will erase all stored settings.  Do not use this unless necessary. SOFTWARE UPGRADE Samsung may offer upgrades for AV Receiver's firmware in the future. Please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your AV Receiver. M  Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.  Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will turn off automatically after completing the firmware upgrade. When software is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.  If you failed software upgrade, it is strongly recommended whole USB data format to FAT16 and retry software upgrade.  The NTFS USB File System can not be supported.  Depending on the manufacturer, the USB may not be supported. 50 HW-C500-C560S-XAA_0609.indd 50 2010-06-09 5:11:37