Samsung LN-T4042H User Manual (ENGLISH) - Page 14
Operation, POWER, ENTER - won t turn
View all Samsung LN-T4042H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the button on the front of the panel. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: 1. Press the POWER button on the remote control. The message "Menu language, Shop Mode, Channels and Time will be set." is displayed. Press the ENTER button, then "Select the language of the OSD" menu is automatically displayed. Menu language, Shop Mode, Channels and Time will be set. Start Plug & Play Select the language of the OSD. 2. Press the ▲ or ▼ buttons to select language, then press the ENTER button. The message "Select Home Mode when installing this TV at home." is displayed. 3. Press the ◄ or ► buttons to select "Shop" or "Home",then press the ENTER button. The message "Select the antennas to memorize." is displayed. Language English Español Français Move Enter Skip We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press any Volume button and then hold down the MENU button for five seconds on the side panel of the TV. Plug & Play Select Home Mode when installing this TV at home. Shop Home 4. Press the ▲ or ▼ buttons to memorize the channels of the selected connection. Press the ENTER button to select "Start". If the antenna is connected to ANT 1(AIR), select "Air" and if it is connected to ANT 2 (CABLE), select "Cable". If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable". In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲ or ▼ button, then press the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area. 5. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. The message "Select the clock mode." is displayed. Move Enter Skip Plug & Play Select the antennas to memorize. Air Cable Air+Cable Start Start Start Move Enter Skip Plug & Play Auto Program in Progress. Air 50 50% Stop To stop the search before it has finished, press the ENTER button with stop selected. Enter Skip Plug & Play 6. Press the ENTER button. Press the ▲ or ▼ buttons to select "Manual" or "Auto", then press the ENTER button. The message "Set to daylight Saving time" is displayed. Auto Program is complete. 16 Channels were memorized. Air : 16, Cable : 0. OK Enter Skip Clock Set Plug & Play Select the clock mode. Clock Mode : Auto Manual Move Enter Skip English - 12