Samsung ML 2150 User Manual (ENGLISH) - Page 202
Setting Network Protocols, Enter, Upper Level
UPC - 635753622201
View all Samsung ML 2150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Setting Network Protocols When you first install the printer, all supported network protocols are enabled when you turn the printer on. If a network protocol is enabled, the printer may actively transmit on the network even when the protocol is not in use. This may increase network traffic slightly. To eliminate unnecessary traffic, you can disable unused protocols. 1 Press the Menu button ( ) until you see "Network" on the bottom line of the display. 2 Press the Enter button ( ) to access the menu. 3 Press the scroll button ( or ) until "Config Network" displays on the bottom line. Press the Enter button ( ). 4 Press the scroll button ( press the Enter button ( button ( ). or ) to display "Yes" and ). Then press the Upper Level 5 Press the scroll button ( or ) until you see the desired protocol on the bottom line. You can choose AppleTalk or Netware. 6 Press the Enter button ( ). 7 Press the scroll button ( or ) to change the setting to "On" (enable) or "Off" (disable). 8 Press the Enter button ( ) to save the selection. E USING YOUR PRINTER ON A NETWORK E.7