Samsung ML 2150 User Manual (ENGLISH) - Page 58
Baud Rate, Robust XON, OPC Cleaning, Fuser Cleaning, Remain Toner, Job Time, RS-232C, Maintenance
UPC - 635753622201
View all Samsung ML 2150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3 Item Explanation Values: 0 ~ 300 sec *15 sec Job Time Out RS-232C You can set the time length the printer waits before printing the last page of a print job that does not end with a command to print the page. When a print time-out occurs, the printer prints the page in the print buffer. This item is only available if the optional 3 serial interface card is installed in your printer. For details, see page F.6. • Baud Rate: Lets you select the rate at which data is being sent to or from your computer using the serial communication. Note that using a setting higher than 19200 bps with the COM port may cause unexpected errors in DOS mode. • Robust XON: Turns use of XON/OFF of serial communication control on or off. When this item is set to On, the printer sends a continuous stream of XONs to the computer to indicate that the serial port is ready to receive more data. Maintenance This item allows you to maintain the toner cartridge. • OPC Cleaning: Cleans the OPC drum of the cartridge and produces a cleaning sheet with toner debris on it. • Fuser Cleaning: Cleans the fuser unit inside of the printer and produces a cleaning sheet with toner debris on it. • Remain Toner: This item allows you to check how much toner are left in the cartridge. USING THE CONTROL PANEL 3.15