Samsung ML 2150 User Manual (ENGLISH) - Page 216
parameters on the control panel; see E.6., into the same connector on the control board
UPC - 635753622201
View all Samsung ML 2150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
7 Replace the control board cover and tighten the two screws. 8 If you purchase the network interface card supporting the wireless LAN interface, insert the antenna counterclockwise, as shown. 9 Connect the network or serial cable, reconnect the power cord and then turn the printer on. NOTES: • For information about configuring and using the printer on a network environment, refer to the User's Guide provided with the network interface card. You can also configure the network parameters on the control panel; see page E.6. • Because the network and the serial interface cards are inserted into the same connector on the control board, you cannot install both of them. F PROGRAMME INSTALLING PRINTER OPTIONS F.9
P
ROGRAMME
I
NSTALLING
P
RINTER
O
PTIONS
F.
9
F
7
Replace the control board cover and tighten the two screws.
8
If you purchase the network interface card supporting the
wireless LAN interface, insert the antenna counterclockwise,
as shown.
9
Connect the network or serial cable, reconnect the power
cord and then turn the printer on.
N
OTES
:
• For information about configuring and using the printer on a
network environment, refer to the User’s Guide provided with
the network interface card. You can also configure the network
parameters on the control panel; see page E.6.
• Because the network and the serial interface cards are inserted
into the same connector on the control board, you cannot install
both of them.