Samsung ML-5000 User Guide - Page 139

Wired network setup 2. Using a network-connected machine 13 You must set up the network protocols on your machine to use it on your network. You can use network after connecting network cable to a corresponding port on your machine. • For models that do not have the display screen on the control panel, use the SyncThru™ Web Service or SetIP program. - See "Using SyncThru™ Web Service" on page 98. - See "Setting IP address" on page 13. • For models that have the display screen on the control panel, configure the network setting by pressing Network menu (see "Network" on page 67). • The machine does not have the display screen: Press the (Cancel or Stop/Clear) button for more than five seconds on the control panel. Using this Network Configuration Report, you can find your machine's MAC address and IP address. For example: • MAC Address: 00:15:99:41:A2:78 • IP Address: 192.0.0.192 5   Setting IP address 4   Printing a network configuration report You can print Network Configuration Report from the machine's control panel that will show the current machine's network settings. This will help you to set up a network. • The machine has the display screen: Press the (Menu) button on the control panel and select Network > Network Config. (Network Configuration). • The machine has the touch screen: Press Setup from the Main screen > Network > Next > Network Configuration. First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. IPv4 configuration using SetIP (Windows) Before using the SetIP program, disable the computer firewall from Control Panel > Security Center > Windows Firewall.