Samsung ML-5000 User Guide - Page 245
Plain Paper
View all Samsung ML-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
Printing quality problems 6. Troubleshooting 119 Condition Suggested Solutions Vertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals: • The imaging unit may be damaged. If you still have the same problem, remove the imaging unit and, install a new one. • Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. • The fusing assembly may be damaged. Contact a service representative. Background scatter A Background scatter results from bits of toner randomly distributed on the printed page. • The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. • If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems. • If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or in Printing Preferences. Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem. Toner particles are around The toner might not adhere properly to this type of paper. bold characters or pictures • Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled. Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.