Samsung NV51M9770DS Installation Guide - Page 10

Installation instructions

Get Samsung NV51M9770DS PDF manuals and user guides View all Samsung NV51M9770DS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Installation instructions Installation instructions Prepare built-in oven WARNING Excessive Weight Hazard Use two or more people to move and install an oven. Failure to do so can result in back or other injury. 1. Decide on the final location for the oven. Avoid drilling or cutting into house wiring during installation. 2. To avoid floor damage, set the oven on a cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remove the shipping materials and tape from the oven. Remember to keep the packing materials that may be needed for installation. 4. Remove the hardware package from inside of the bag containing literature. 5. Remove racks and other parts from inside the oven. 6. Move oven and cardboard close to the oven's final location. Remove and replace oven door(s) IMPORTANT: Use two hands to remove oven door. For double ovens, repeat the process for each door. Prior to removing the oven door, prepare a surface where you will place it. This surface should be flat and covered with a soft blanket, or use the corner posts from your packaging material. Disconnect LED light wire harness Locate the LED light wire harness and disconnect it before removing the door. Single Oven Wire Harness Double Oven 1. Carefully pull the wire to reveal the connector. 2. Disconnect the connector. 10 English Install_NW9000K_CHEF_WALL-DG68-01005A-00_EN+MES+CFR.indb 10 7/31/2017 4:43:20 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
10 English
Installation instructions
Installation instructions
Prepare built-in oven
WARNING
Excessive Weight Hazard
Use two or more people to move and install an oven.
Failure to do so can result in back or other injury.
1.
Decide on the final location for the oven. Avoid drilling or cutting into house
wiring during installation.
2.
To avoid floor damage, set the oven on a cardboard prior to installation. Do
not use handle or any portion of the front frame for lifting.
3.
Remove the shipping materials and tape from the oven.
Remember to keep the packing materials that may be needed for installation.
4.
Remove the hardware package from inside of the bag containing literature.
5.
Remove racks and other parts from inside the oven.
6.
Move oven and cardboard close to the oven’s final location.
Remove and replace oven door(s)
IMPORTANT:
Use two hands to remove oven door. For double ovens, repeat the
process for each door.
Prior to removing the oven door, prepare a surface where you will place it. This
surface should be flat and covered with a soft blanket, or use the corner posts
from your packaging material.
Disconnect LED light wire harness
Locate the LED light wire harness and disconnect it before removing the door.
Wire Harness
Single Oven
Double Oven
1.
Carefully pull the wire to reveal the
connector.
2.
Disconnect the connector.
Install_NW9000K_CHEF_WALL-DG68-01005A-00_EN+MES+CFR.indb
10
7/31/2017
4:43:20 PM