Samsung NV51M9770DS Installation Guide - Page 4
Preparation
View all Samsung NV51M9770DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Preparation Preparation Checklist Use this checklist to verify that you have completed each step of the installation process. This can help you avoid mistakes. 1. Before installing the oven, be sure to verify the cabinet dimensions are correct for your unit and the required electrical connections are present. 2. Refer to the installation manual for content regarding Safety, Cabinet Dimensions, Removing Packaging, Electrical Installation, Testing the Installation and Customer Service. 3. To lift up the oven, hang the install handle onto the side hook of the unit. 4. Move the oven unit into place in front of the cabinet opening, leaving the bottom packaging on the unit to avoid damaging flooring. 5. Team lift the unit directly into the cabinet cutout taking care not to pinch fingers or scratch hands or arms. Make sure the electrical conduit reaches to the connection point properly. 6. Slide the unit all the way into place, making sure to route the electrical conduit correctly. 7. Fasten the oven unit to the cabinetry opening with screws supplied (using Phillips screwdriver). 8. Consult the complete installation instructions and follow the remainder of the procedures listed, including performing an operation test. 9. All product literature and accessories are supplied (may be wrapped or boxed) with the oven. 10. INSTALLER - Leave the literature pack and the accessories with the customer. 11. Hang the install handle onto the side hook of the oven. Prepare to install the oven Phillips Screwdriver Prepare to install the oven 6 screws (M4 L16) 6 Wood Screw For Mounting (4 needed for Single ovens and 6 needed for double ovens) Materials needed Drill Install Handle (only for double oven) Junction Box Wire Nuts 3/4" Conduit Connector 4 English Install_NW9000K_CHEF_WALL-DG68-01005A-00_EN+MES+CFR.indb 4 7/31/2017 4:43:18 PM