Samsung NV51T5511DS/AA User Manual - Page 28

Self Clean 2/3/5h, START/SET, English

Page 28 highlights

Maintaining your appliance Before a self-cleaning cycle Fig. 1 Fig. 2 • • • • Don't hand clean the oven door • gasket. You may hand clean the door. • • We recommend venting your kitchen with an open window or using a ventilation fan or hood during the selfcleaning cycle. Remove the wire rack, broil pan, broil pan insert, all cookware, and any aluminum foil from the oven. Wipe up debris from the oven bottom. (Fig. 1) The silver-colored oven racks can be self-cleaned, but they will darken, lose their luster, and become hard to slide. Residue on the front frame of the oven and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads, or cleansers such as Soft Scrub. Rinse well with clean water and dry. Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, have it replaced. (Fig. 2) Make sure the oven light cover is in place and the oven light is off. NOTE Remove oven racks and accessories before starting the self-clean mode. How to run a self-cleaning cycle 1. Select the length of time for the self-cleaning operation, eg. 3 hours. Touch Self Clean 2/3/5h once for a 3 hour clean time, twice for a 5 hour clean time, or 3 times for a 2 hour clean time The default setting is 3 hours. 2. Touch START/SET to start the self-cleaning cycle. The motor-driven door lock will engage automatically. IMPORTANT: Both doors lock when you run a self cleaning cycle on either oven. NOTE • You will not be able to start a self-cleaning cycle if the Control Lockout feature is activated or if the oven's temperature is too hot. • The oven doors lock automatically. The display will show the cleaning time remaining. You cannot to open the oven doors until the temperature drops to a safe/cool temperature. • The self-clean feature can be used in only one oven at a time. While one oven is in self-cleaning mode, you cannot use the other oven for cooking. 3. When the self-cleaning cycle is done, End will appear in the display and the oven will beep 3 times. Maintaining your appliance 28 English NV51R5511D_AA_DG68-01126A-02_EN.indd 28 11/5/2019 10:31:08 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

28 English
Maintaining your appliance
Maintaining your appliance
Before a self±cleaning cycle
Fig. 1
Fig. 2
Don’t hand
clean the
oven door
gasket.
You may
hand clean
the door.
We recommend venting your kitchen
with an open window or using a
ventilation fan or hood during the self-
cleaning cycle.
Remove the wire rack, broil pan, broil
pan insert, all cookware, and any
aluminum foil from the oven.
Wipe up debris from the oven bottom.
(Fig. 1)
The silver-colored oven racks can be
self-cleaned, but they will darken, lose
their luster, and become hard to slide.
Residue on the front frame of the oven
and outside the gasket on the door
will need to be cleaned by hand. Clean
these areas with hot water, soap-filled
steel-wool pads, or cleansers such as
Soft Scrub. Rinse well with clean water
and dry.
Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for
the gasket to remain intact. If you
notice it becoming worn or frayed, have
it replaced. (Fig. 2)
Make sure the oven light cover is in
place and the oven light is off.
NOTE
Remove oven racks and accessories before starting the self-clean mode.
How to run a self±cleaning cycle
1.
Select the length of time for the self-cleaning operation, eg. 3 hours.
Touch
Self Clean 2/3/5h
once for a 3 hour clean time, twice for a 5 hour clean
time, or 3 times for a 2 hour clean time
The default setting is 3 hours.
2.
Touch
START/SET
to start the self-cleaning cycle.
The motor-driven door lock will engage automatically.
IMPORTANT: Both doors lock when you run a self cleaning cycle on either
oven.
NOTE
You will not be able to start a self-cleaning cycle if the Control Lockout
feature is activated or if the oven’s temperature is too hot.
The oven doors lock automatically. The display will show the cleaning
time remaining. You cannot to open the oven doors until the temperature
drops to a safe/cool temperature.
The self-clean feature can be used in only one oven at a time. While one
oven is in self-cleaning mode, you cannot use the other oven for cooking.
3.
When the self-cleaning cycle is done, End will appear in the display and the
oven will beep 3 times.
NV51R5511D_AA_DG68-01126A-02_EN.indd
28
11/5/2019
10:31:08 AM