Samsung NX300 User Manual Ver.1.0 (English) - Page 124

Wireless network Connecting to a WLAN and configuring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings. Connecting to a WLAN 1 Rotate the mode dial to B. 2 Select , , , or . 3 Press [m], and then select Wi-Fi Setting. • In some modes, follow the on-screen instructions until the Wi-Fi Setting screen appears. • The camera automatically searches for available AP devices. 4 Select an AP. Refresh Samsung1 Samsung2 Samsung3 Samsung4 Back • Select Refresh to refresh connectable APs. • Select Add wireless network to add an AP manually. Your AP name must be in English to add the AP manually. Icon/Option Description Ad hoc AP Secured AP WPS AP Signal strength Press [F] or touch to open network setting options. • When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 127) • When a login page appears, refer to "Using the login browser". (p. 125) • When you select an unsecured AP, the camera will connect to the WLAN. • If you select a WPS profile supported AP, select → WPS PIN connection, and then enter a PIN on the AP device. You can also connect to a WPS profile supported AP by selecting → WPS button connection on the camera, and then pushing the WPS button on the AP device. • The same AP may be listed twice, with different frequencies, because your camera supports the dual band function. 123