Samsung NX58K3310SS/AA Installation Guide - Page 15

Minimum dimensions WARNING If overhead cabinets are provided, a range hood should also be provided that projects horizontally a minimum of 5 in (12.7 cm) beyond the front of the cabinets. This will dissipate any heat buildup in the overhead cabinets to prevent death, personal injury, and/or fire hazard. The ventilating hood must be constructed of sheet metal not less then 0.0122" thick. Install above the cooktop with a clearance of not less than 1/4" between the hood and the underside of the combustible material or metal cabinet. The hood must be at least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the ventilation hood surface must never be less than 24 inches. Exception : Installation of a listed microwave oven or cooking appliance over the cooktop shall conform to the installations packed with that appliance. • 30-in (76.2-cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or If no 30-in (76.2cm) minimum clearance, 24-in (61-cm) minimum when the bottom of the wood or metal cabinet is protected by not less than 0.25-in (0.64-cm) flame-retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015-in (0.038cm) stainless steel, 0.024-in (0.061-cm) aluminum, or 0.020-in (0.051-cm) copper. • 18-in (45.7-cm) minimum between the countertop and the adjacent cabinet bottom. Recommended locations for gas piping and electrical outlets 17 in x 9 in (43.2 cm x 22.9 cm) Gas Wall Area Recommended area for through-the-wall and through-the-floor connection of gas pipe stub and shut-off valve. Recommended position 12 in (30.5 cm) Recommended area for 120 V electrical outlet on rear wall 17(4Gi3na.2sxFc2mloion3xr0C5Aai.brn1ein(ac7me6t).O2pcemn)ing Installation requirements English 15