Samsung NX58K3310SS/AA Installation Guide - Page 18

Installation requirements Tools and materials Additional installation requirements for mobile homes The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes. In Canada, mobile home installation must be in accordance with the current CAN/CSA Z240/MH Mobile Home Installation Code. Power cord location 21/8" The power cord for this appliance is located on the back of the range, near the bottom right hand corner. The 53-in (135-cm) power cord will come installed on the range and taped to the back for shipping. 53/4" Power cord location What's in the box Parts supplied Surface burner grates (3) Surface burners and caps (5) Flat rack (2) Anti-tip bracket kit • Make sure you have received all of the supplied parts shown above. • If your range was damaged during shipping or you do not have all of the supplied parts, contact your local retailer. NOTE If you need an accessory marked with an * (asterisk), please contact the Samsung Call Center using the phone number listed on the last page of this manual or visit our on-line parts web site at www.samsungparts.com. Tools and materials 18 English