Samsung NX58K3310SS/AA Installation Guide - Page 25
English 25
View all Samsung NX58K3310SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Step 8. Check the ignition of surface burners and oven burners Check the operation of all cooktop and oven burners after the range has been installed and assembled, gas supply lines have been carefully checked for leaks, and electrical power cord has been plugged in. All surface and oven burners have electronic ignition. To turn on a surface burner: 1. Push in and turn the control knob for that surface burner to the LITE position. The "clicking" sound indicates the electronic ignition system is operating properly. The burner will light in about 4 seconds, after the air has been purged from the supply line. 2. After the burner lights, turn the control knob to the desired setting. The "clicking" sound will stop and the flame height will change from Max. to Min. during turning the control knob. 3. Repeat steps 1 and 2 to check the operation of each surface burner in succession. NOTE Place food in the oven after preheating if the recipe calls for it. Preheating is important for good baking results. After the oven has reached the desired cooking temperature, it will beep 6 times. To start the bake burners 01 02 03 04 1. Press the Bake button. 2. If necessary, use the arrow buttons to change the default temperature (350 °F). You can set the oven to any temperature from 175 °F to 550 °F. 3. Press the START/SET button. 4. When cooking is complete, press the OFF/CLEAR button. To start the broil burners 01 02 03 1. Press the Broil button once for HI temperature broiling or twice for LO. 2. Press the START/SET button to start the broiler. 3. When cooking is complete, press the OFF/CLEAR button. Installation instructions English 25