Samsung PN50A760T1F User Manual (ENGLISH) - Page 118

Network Test You can test or confirm the network connection status after setting up the network. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER button. Setup Network selection : Wireless Cable Network Setup Wireless Network Setup ► V-Chip Caption External Settings Entertainment : Off Energy Saving : Off PIP Software Upgrade 3 Press the ▲ or ▼ button to select Network Test, then press the ENTER button. ➣ The current network settings will appear. ➣ If no Access Point Select is set up, the test cannot be completed. (See page 117) Press the EXIT button to exit. When unable to connect to a wireless network 1. Y our TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try again. 2. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the first time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics Service Center. Wireless Network Setup Internet Protocol Setup : Auto Setup Network Test Access Point Select : AP1 IP Address :0 0 0 0 Subnet Mask :0 0 0 0 Gateway :0 0 0 0 DNS Server :0 0 0 0 Move Enter Return Network Test MAC Address IP Address, Subnet, Gateway, DNS Server Gateway Ping Domain Ping Network Test Completed. Return English - 118