Samsung PN50A760T1F User Manual (ENGLISH) - Page 126

Scanning and Switching between Anynet+ Devices 1 Press the TOOLS button. Press the ENTER button to select Anynet+ (HDMI-CEC). 2 Press the ▲ or ▼ button to select Device List, then press the ENTER button. ➢ Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices. ➢ Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu appears. View TV Device List Recording : DVDR DVDR Operation Receiver Setup : On Move Enter Return 3 Press the ▲ or ▼ button to select a particular device and press the ENTER button. It is switched to the selected device. ➢ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. ➢ The time required to scan for devices is determined by the number of connected devices. ➢ When the device scan is complete, the number of devices found are not displayed. ➢ Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, press the red button on the remote to search devices. ➢ If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an external Anynet+ device by using the TOOLS button. English - 126