Samsung RF220NCTASP/AA User Manual Ver.0.1 (English, French, Spanish) - Page 10

Setting up your French Door Refrigerator GETTING READY TO INSTALL THE REFRIGERATOR Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and Selecting the best location for the refrigerator • A location with easy access to a water supply. • A location without direct exposure to sunlight. • A location with a leveled floor. • A location with enough space for the refrigerator doors to open easily. • A location that allows sufficient space to the right, left, back and top for air circulation. • A location that allows you to move the refrigerator easily if it needs maintenance or service. The following chart details the exact height and depth of this Samsung French Door Refrigerator. • Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower. • Do not install the refrigerator where the temperature will go below 50 ºF (10 ºC). • Do not locate the refrigerator where it may become wet. 29 3/4" (756 mm) 30 1/2" (774 mm) 15 1/4" (387 mm) 46 1/8" (1171 mm) 53 1/2" (1359 mm) 3 3/8" (87 mm) 21 5/8" (549 mm) 36 3/4" (934 mm) 34 1/4" (872 mm) 1 3/8" (36 mm) 1 3/8" (34 mm) 48 5/8" (1234 mm) 30 ¼" (770 mm) 61 1/8" (1554 mm) 39 5/8" (1007 mm) 66 3/4" (1697 mm) 5/8" (16 mm) 24 5/8" (625 mm) 1 7/8" (48 mm) 47" (1194 mm) If the refrigerator does not have enough space, the internal cooling system may not work properly. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When you install the refrigerator next to a fixed wall, you need a minimum clearance of 3 ¾" (95 mm) between the refrigerator and wall to allow the door to swing open. First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc. When moving your refrigerator To prevent floor damage, be sure the front CAUTION adjusting legs are in the up position (above the floor). Refer to 'Adjusting the Level' in the manual (on page 15). Flat-blade screwdriver(-) Control Lever 10_ setting up %""JOEC