Samsung RF25HMEDBBC User Manual Ver.0.0 (English, French, Spanish) - Page 12

Re-attaching The, Refrigerator Doors, Disassembling The Flex

Get Samsung RF25HMEDBBC PDF manuals and user guides View all Samsung RF25HMEDBBC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

RE-ATTACHING THE REFRIGERATOR DOORS To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order. 3. Press the locking tab and separate the Wire Connector. 1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser. Type A Center of Transparent coupler clip A (1/4") (6.35 mm) Type B Dispenser The Guide Lines clip A (1/4") (6.35 mm) CAUTION When reassembling it, be sure to connect the wire harness. If it is not connected, the Flex Room does not work. 2. Insert the clip in the install pack and check that it holds the line firmly. 4. Remove 1 hex head bolt from each side with a socket wrench (10 mm). DISASSEMBLING THE FLEX DOOR 1. Take out the Flex Zone ( 1 ) by lifting it up. 1 5. Lift up the Flex door from the rails. 2. Take off the cover ( 2 ) w/harness with a flatblade screwdriver (-). 2 DA68-02952A-00.indb 12 English - 12 13. 10. 25. 2:54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
English - 12
RE-ATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1.
The Water Line must be fully inserted into the
center of the transparent coupler (Type A)
or the Guide Lines (Type B) to prevent water
leakage from the dispenser.
Center of Transparent coupler
Center of Transparent coupler
The Guide Lines
The Guide Lines
Dispenser
Dispenser
clip A (1/4”)
clip A (1/4”)
(6.35 mm)
(6.35 mm)
clip A (1/4”)
clip A (1/4”)
(6.35 mm)
(6.35 mm)
Type A
Type A
Type B
Type B
2.
Insert the clip in the install pack and check that
it holds the line firmly.
DISASSEMBLING THE FLEX
DOOR
1.
Take out the Flex Zone (
1
) by lifting it up.
1
2.
Take off the cover (
2
) w/harness with a flat-
blade screwdriver (-).
2
3.
Press the locking tab and separate the Wire
Connector.
CAUTION
When reassembling it, be sure to connect the wire
harness.
If it is not connected, the Flex Room does not
work.
4.
Remove 1 hex head bolt from each side with a
socket wrench (10 mm).
5.
Lift up the Flex door from the rails.
DA68-02952A-00.indb 12
DA68-02952A-00.indb
12
13. 10. 25.
2:54
13. 10. 25.
2:54