Samsung RF25HMEDBBC User Manual Ver.0.0 (English, French, Spanish) - Page 29
Caution
View all Samsung RF25HMEDBBC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
02 OPERATING • Tilt up the front of the drawer and pull straight towards you. Then, move the drawer slightly in the direction of the arrow in the illustration below, and then pull out. If the Flex Zone or LED lighting is not working, check the connectors [ ( 1 ), ( 2 ) shown below ] for cracks or leaks. 2 To re-install • Insert the drawer into the frame rails and push back into place. • Slide the bin in above the desired location and push down until it stops. CAUTION The drawers need to be removed before the glass shelf above them can be lifted out. 4. Flex Zone To remove the Flex Zone - Pull the Flex door out to full extension. Lift the Flex Zone up, pulling 1 it to your body with both hands. To re-install the Flex Zone - Open the Flex door to full extension. Tilt the front of the Flex Zone up, place the back of the Flex Zone onto the rails, and then lower the front until the whole Zone rests on the rails. 1. Refer to page 12 for disassembly instructions. 2. Open the cap cover rail with a flat-blade screwdriver. Using the doors Ensure that the doors close all the way and are securely sealed. When the refrigerator door is only partially open, it will automatically close. If the door is opened more than its auto close range, it will remain open. You must close it manually. DA68-02952A-00.indb 29 English - 29 13. 10. 25. 2:54