Samsung RF25HMEDBBC User Manual Ver.0.0 (English, French, Spanish) - Page 14
Re-assembling The, Freezer Door, Adjusting The Level, Making Minor, Adjustments To The, Doors - reviews
View all Samsung RF25HMEDBBC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
RE-ASSEMBLING THE FREEZER DOOR To reattach the drawer after you have moved the fridge to its final location, assemble the parts in reverse order. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. ADJUSTING THE LEVEL Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. MAKING MINOR ADJUSTMENTS TO THE DOORS Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. How to adjust the level 1. Open the freezer drawer and remove the lower basket. 2. Insert a flat-blade screwdriver (-) into the notch on the left control lever, and then turn it counter-clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) Fixed part Adjustment part The left door is fixed. To make minor adjustments between doors, adjust only the right door. flat-blade screwdriver (-) Control Lever 1. Pull out the Convertible door ( 1 ) to expose the lower hinge ( 2 ). 2. Insert the supplied allen wrench (5/32" (4 mm)) ( 3 ) into the shaft ( 4 ) of the lower hinge. 3. Please adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counterclockwise ( UP ). CAUTION 2 Both control levers must be touching the floor to avoid possible personal injury or property damage 3 3 4 because of tipping. 1 If the right side is lower, perform the same procedure, but with the right control lever. When you turn the hex wrench counter- clockwise ( ), the door will move up. English - 14 DA68-02952A-00.indb 14 13. 10. 25. 2:54