Samsung RF4287HARS User Manual - Page 11

Installing The Water Line - water not dispensing

Page 11 highlights

01 SETTING UP Connecting to the water supply line 1. First, shut off the main water supply. 2. Locate the nearest cold water drinking line and install the pipe clamp and shut off valve. Cold water line Pipe clamp Shut off valve 3. Connect the water line installation kit to shut off valve. Cold water line Pipe clamp Shut off valve Water line installation kit Refrigerator Plastic tubing (Assembled) Compression nut (1/4") (Assembled) Compression fitting (Assembled) Ferrule (Not supplied) Molded end(Bulb) Compression nut (B) (1/4") (Not supplied) Copper tubing or Plastic tubing (B) (Not supplied) (Not supplied) Household water supply line 1. Connect the household water line to the assembled compression fitting. - If you are using copper tubing, slip the compression nut ( B ) (not supplied) and ferrule (not supplied) on copper tubing (not supplied) as shown. - If you are using plastic tubing ( B ) , insert the molded end (Bulb) of the plastic tubing ( B ) into the compression fitting. INSTALLING THE WATER LINE Connecting the water supply line to the refrigerator. There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store. Use Copper Tubing • ¼" copper tubing • ¼" compression nut (1pc) • Ferrule (2pc) Use Plastic Tubing • ¼" plastic tubing → Molded end(Bulb) • ¼" compression nut (1pc) Do not use without the molded end(Bulb) of CAUTION the plastic tubing ( B ). 2. Tighten the compression nut ( B ) onto the compression fitting. Do not over-tighten the compression nut ( B ) . 3. Turn water on and check for any leakage. If you find water drops or leakage in the connection areas, turn off the main water supply. Check the connections and, if nescessary, tighten. 4. Flush 1 gallon of water through the filter before drinking or using the water from the refrigerator. (Flush approximately 6 minutes.) To flush, press a large glass or cup against the water dispenser lever. Fill the glass, empty it into the kitchen sink after it is filled, and then repeat. %""JOEC setting up _11 1.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

setting up
_11
01 SETTING UP
Connecting to the water supply line
1.
First, shut off the main water
supply.
2.
Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
3.
Connect the water line installation kit to shut off
valve.
INSTALLING THE WATER LINE
Connecting the water supply line to the
refrigerator.
There are several items that you need to purchase to
complete this connection.
You may find these items sold as a kit at your local
hardware store.
Use Copper Tubing
Use Plastic Tubing
¼” copper tubing
¼” compression nut (1pc)
Ferrule (2pc)
¼” plastic tubing
Molded end(Bulb)
¼” compression nut (1pc)
1.
Connect the household water line to the
assembled compression fitting.
-
If you are using copper tubing, slip the
compression nut (
B
) (not supplied) and ferrule
(not supplied) on copper tubing (not supplied) as
shown.
-
If you are using plastic tubing (
B
) , insert the
molded end (Bulb) of the plastic tubing (
B
) into
the compression fitting.
Do not use without the molded end(Bulb) of
the plastic tubing (
B
).
2.
Tighten the compression nut (
B
) onto the
compression fitting.
Do not over-tighten the compression nut (
B
) .
3.
Turn water on and check for any leakage. If you
find water drops or leakage in the connection
areas, turn off the main water supply. Check the
connections and, if nescessary, tighten.
4.
Flush 1 gallon of water through the filter before
drinking or using the water from the refrigerator.
(Flush approximately 6 minutes.) To flush, press
a large glass or cup against the water dispenser
lever. Fill the glass, empty it into the kitchen sink
after it is filled, and then repeat.
Pipe clamp
Pipe clamp
Cold water line
Cold water line
Shut off valve
Shut off valve
Shut off valve
Shut off valve
Pipe clamp
Pipe clamp
Cold water line
Cold water line
Water line installation kit
Water line installation kit
Plastic tubing
Plastic tubing
(Assembled)
(Assembled)
Ferrule (Not
Ferrule (Not
supplied)
supplied)
Compression nut
Compression nut
(1/4”) (Assembled)
(1/4”) (Assembled)
Compression
Compression
fitting
fitting
(Assembled)
(Assembled)
Molded
Molded
end(Bulb)
end(Bulb)
Compression nut
Compression nut
(B) (1/4”) (Not
(B) (1/4”) (Not
supplied)
supplied)
or
Copper tubing
Copper tubing
(Not supplied)
(Not supplied)
Plastic tubing (B)
Plastic tubing (B)
(Not supplied)
(Not supplied)
Household water supply line
Refrigerator
CAUTION
DA68-01922A.indb 11
DA68-01922A.indb
11
2013.3.4 1:32:45 PM
2013.3.4
1:32:45 PM