Samsung RF4287HARS User Manual - Page 8

DISASSEMBLE THE FLEX DOOR 1. Take out the Flex Zone ( 1 ) by lifting it 1 up. 2. Take off the cover ( 2 ) w/harness with a 2 flat-blade screwdriver (-). 3. Press the locking tab and separate the Wire Connector. ASSEMBLE THE FLEX DOOR To reattach the flex doors, assemble parts in reverse order. Be sure to connect the Flex Door Wire CAUTION Connector. If it is not connected, the Flex Room does not work. DISASSEMBLE THE FREEZER DRAWER 1. Take out the upper drawer by lifting it up. 2. Remove the tilting pocket ( 1 ) by pulling both support guards ( 2 ) aside. And take out both support guards by pulling them aside. When reassembling it, be sure to connect the CAUTION wire harness. 1 If it is not connected, the Flex Room does not work. 2 4. Remove 2 hex head bolts from sides with a socket wrench (10mm). 3. Take out the lower basket ( 3 ) by lifting 3 the basket up from the rail system. 5. Lift up the Flex door from the rails. 4. Remove 4 hex head bolts from both sides with a socket wrench (10mm). Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost build-up. 5. Lift up the freezer door from the rails. 08_ setting up %""JOEC


 1.