Samsung RF4287HARS User Manual - Page 14

USING THE CONTROL PANEL 1. Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter- If you do not press any button(letters not ICON), the clockwise. display turns off in a few seconds. 2. Pull the water filter ( 1 ) from the case filter (Red) If you press any button(letters not ICON) , the display ( 2 ). lights up again. The Function key will operate only when you touch the letters. 2 ( 10 ) Filter (Blue) (Red) (Reset the indicator) Water filter usage 1. Normally the filter indicator is blue, yellow, or green when you purchase or install your refrigerator, depending on your model. 2. After you use about 270 gallons of water, the filter indicator turns Light Pink. (about 5 months) 3. After you use about 300 gallons of water, the filter indicator turns Red. (about 6 months) 4. Remove the old water filter and install a new one when the filter indicator is red. Reset the filter indicator by pressing Alam/Hold 3 sec for Filter Reset button for 3sec. The filter indicator turns blue, yellow, or green when you reset the indicator. • If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged. • Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly. CHANGING THE WATER FILTER To reduce risk of water damage to your WARNING property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTER. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter. The Filter light turns red to let you know when it is time to change your water filter cartridge. To give you time to get a new filter, the red light comes on just before the capacity of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest water from your refrigerator. 1 • To change the water filter more easily, shut off the water supply valve. • Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard. • When you pull the water filter, a little water can leak from the opening. This is normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it. • To prevent overflow, empty the water tray filter ( 3 ) and dry around of case filter ( 2 ). 3. Insert the new filter into the filter case ( 4 ) 2 4. Push the filter, and then turn it clockwise until it 3 locks. • If you are in trouble of inserting the water filter as high pressure of water, shut off the water supply valve. • The locked symbol should be lined up with the indicator line. 4 5. press the "Alarm/hold 3 sec for Filter Reset" button ( (Filter Reset) ) for about 3 seconds to reset the water filter. The color of indicator ( ) changes from red to blue, green, or yellow. 14_ operating %""JOEC


 1.