Samsung SCD-3080 User Manual - Page 10

Connection RJ-45 Connector Schematic Diagram Copper Connector UTP Coating No. Line Color 1 White+Orange 2 Orange 3 White+Green 4 Blue 5 White+Blue 6 Green 7 White+Brown 8 Brown Camera to Power Supply VIDEO (+) VIDEO (-) RS485 (+) POWER (-) POWER (+) RS485 (-) POWER (+) POWER (-) Power Supply to Receiver VIDEO (+) / RS-485 (+) CH1 VIDEO (-) / RS-485 (-) VIDEO (+) / RS-485 (+) CH2 VIDEO (-) / RS-485 (-) VIDEO (+) / RS-485 (+) CH3 VIDEO (-) / RS-485 (-) VIDEO (+) / RS-485 (+) CH4 VIDEO (-) / RS-485 (-) The SUD-3080 uses UTP cable to receive its power (AC24V/AC28V) from the Power Supply. Therefore, a separate adapter is not required. Please refer to the RJ-45 Connector Schematic Diagram. COLOR DOME CAMERA 18 SUD-3080 Using Coaxial Communications • Coaxial Communications System • OSD Control method CAMERA SET UP DOWN LEFT RIGHT DVR MENU/ENTER UP KEY DOWN KEY LEFT KEY RIGHT KEY CONTROLLER OSD KEY JOYSTICK UP JOYSTICK DOWN JOYSTICK LEFT JOYSTICK RIGHT DVR k}k • : BNC • ---- : RS-485 • Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp. Distance 300m 450m 600m Recommended Cable Specification 3C2V(RG-59/U) 5C2V(RG-6/U) 7C2V(RG-11/U) Notes • It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable. COLOR DOME CAMERA 19 SUD-3080