Samsung SCD-3080 User Manual - Page 18

Operating Your Camera Notes • When the V-REV or H-REV mode is enabled, the text on the screen does not flip. • If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
CAM TITLE : If you enter a title, the title will appear on the monitor. 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates 'CAM TITLE'. 2) Set it to 'ON' by using the Function Setup switch. 3) Press the Function Setup switch. CAMERA TITLE SETUP ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm 4) Use the Function Setup switch to move to a desired letter and select the letter by pressing the Function Setup switch. nopqrstuvwxyz -.0123456789 ąĄCLR POS END Repeat this to enter multiple letters. You can enter up to 15 letters. 5) Enter a title, move the cursor to 'POS' and press the Function Setup switch. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch. When the position is determined, select 'END' and press the Function Setup switch to return to the SPECIAL menu. FRONT DOOR Notes • When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you enter one. • English and Numbers are available in this mode. • If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch. COLOR DOME CAMERA 34 SUD-3080
SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL) frequency, you can synchronize the output phase of multiple cameras using the power synchronization function (Line-Lock) without using a synchronization signal generator. ⰒINT : Internal Synchronization Type ⰒL/L : Power Synchronization Type, Line-lock ❶ Press the Function Setup switch. ❷ You can select a desired phase from 0 to 359 when select 'phase'. Notes • When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L type synchronization. • When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
INTELLIGENCE : Commands the camera to motion-detect and trace an object. INTELLIGENCE 1. MOTION OFF 2. DETECT BOX ON 3. ALARM OUT OFF 4. DETECT AREA 5. MASK AREA 6. SENSITIVITY 3 7. DET. SIZE 3 8. RETURN COLOR DOME CAMERA 35 SUD-3080