Samsung SCD-3080 User Manual - Page 9

Connection System Diagram UTP Power Supply Link Setup 1. SUD-3080 Ą 4Ch Power Supply Ą 4Ch Receiver Ą DVR/Monitor/Controller The maximum power transmission distance for the camera is 300m(1000ft), and the distance between the camera and the 4ch Receiver cannot exceed 900m(3000ft). SUD-3080 RS-485 VIDEO SPU-400 300m(1000ft) or Less SPU-400R 900m(3000ft) or Less CH1 CH2 CH3 CH4 SCC-3100A UTP CABLE BNC CABLE RS-485 2. UTP Receiver Link Setup(Additional Power input is needed) SUD-3080 Ą 1Ch Passive Receiver Ą DVR Ą Monitor 225m(750ft) or Less 1Ch Passive Receiver COLOR DOME CAMERA 16 SUD-3080 Notes • Using the product with third-party UTP peripherals may result in degradation of product function and performance. • Attenuation and distortion in signal may occur if the maximum transmission distance is exceeded. Please note that depending on the installation environment/condition, the signal may become attenuated and distorted and cause the camera to function incorrectly even when the transmission distance is within the maximum. • If using RS-485 communication, please use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC Protocol. • If you are using the 1Ch Passive Receiver system setup, please connect the adapter (AC 24V or DC 12V) directly to the camera. UTP CABLE The camera uses UTP cable for transmitting video signals, power and transferring RS-485 control data.(TIA/EIA-568B) No. Line Color 1 White+Orange 2 Orange 3 White+Green 4 Blue 5 White+Blue 6 Green 7 White+Brown 8 Brown Camera to Power Supply VIDEO (+) VIDEO (-) RS485 (+) POWER (-) POWER (+) RS485 (-) POWER (+) POWER (-) Power Supply to Receiver VIDEO (+) / RS-485 (+) CH1 VIDEO (-) / RS-485 (-) VIDEO (+) / RS-485 (+) CH2 VIDEO (-) / RS-485 (-) VIDEO (+) / RS-485 (+) CH3 VIDEO (-) / RS-485 (-) VIDEO (+) / RS-485 (+) CH4 VIDEO (-) / RS-485 (-) ➊ ➑ ➑ ➊ COLOR DOME CAMERA 17 SUD-3080