Samsung SCD-3080 User Manual - Page 8

Installation Adjust the panning and tilting, rotating while watching the monitor 170˚ Pan Base 145˚ 195˚ 73˚ Tilt Base Rotate Base 170˚ 1) You can adjust the camera to any direction by using Pan, Tilt, Rotate mechanism. • Pan Bracket moves by 170° in each direction or 340° on the whole. • Tilt Base covers total 73˚ angle(0˚ ~ 73˚). • The angle range of the Rotate Body is the same as that of the Pan Bracket. But one direction range is 195° and another is 145° 2) Methods of adjustment • Mounting on a wall
➊ After mounting the camera on a wall, adjusting the panning angle so that the camera can face the direction to monitor when tilted.
➋ Adjust the tilting angle by rotating the tilt base.
➌ Loosen the rotate base hold screw and adjust rotate base for the best view.
➍ Tighten the rotate base hold screw. • Mounting on a ceiling
➊ After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing position by rotating the pan base.
➋ Adjust the tilting angle by rotating the tilt base.
➌ Loosen the rotate base hold screw and adjust rotate base for the best view.
➍ Tighten the rotate base hold screw. COLOR DOME CAMERA 14 SUD-3080 Adjusting varifocal lens zoom and focus 1) Unlock the zoom(focus) handle by turning anti-clockwise. 2) Adjust the zoom(focus) by moving the handle to WIDE(FAR) or TELE(NEAR). 3) After adjustment, tighten the zoom (or the focus) handle, taking care that the adjusted position does not change. FAR NEAR WIDE TELE Focus Handle Zoom Handle Connecting External Cable You can use the External Cable provided with camera as the following features. RWBEHLDAIT(CMEKD(E_(GXOTNU_DTD)N) ➊ ➋ ➌ ➊ MD Output Terminal : Motion detection signals are output through this terminal. ➋ D & N Input Terminal : You can switch to Day & Night Mode by connecting an external signal to this terminal. ➌ Ground Terminal COLOR DOME CAMERA 15 SUD-3080