Samsung SSC-1000 User Guide - Page 13

SSC-1000 (gb) 2009.1.8 1:38 PM Page 22 User's Guide 5. Confirmation Matter in Times of Abnormality Occurrence Symptom Confirmation and Management Matters Control of the camera part is not possible. 1. Check the polarity of the RS-485 indication line. 2. Check if the address of the camera part has been set up well. The input channel number of the Matrix Switcher and the number of the camera part appear differently. Set up the address number of the camera part and the input channel number of the Matrix Switcher to be the same. Because I cannot remember the Password of this machine, I cannot enter the set-up MENU. In the state in which the RESET button has been pressed, if you put in again the power, the machine gets into the state freshly out of the plant, and you can go into the set-up menu. ❈ The contents and the circuits in this explanation can be changed due to such reasons as the functional improvement of the production. 22 6. Specifications ITEM Communication Interface Type Port Connector Type Baud Rate SPECIFICATION RS-485 Modular Type x2, D-SUB x1 1200, 2400, 4800, 9600, 19200, 38400 BPS PROTOCOL SAMSUNG, PELCO-D, PELCO-P, VICON PANASONIC, KALATEL, DIAMOND, AD, PHILIPS,ERNA, VCL TP, TECHWIN Display LCD LED 20 ✕ 4 line MENU, PRESET, PATTERN, SCAN, AUTO PAN, RESET Switching Video Switching SEQUENCE, TOUR, SALVO & Pan/Tilt & Lens Pan left/right Control Control Tilt up/down Iris open/close Focus far/near Zoom tele/wide Preset, Auto pan, Scan, Pattern External AUX1, AUX2, AUX3, AUX4 machinery Control Power Source DC 9V 600mA Dimension 315(W) ✕ 205(D) ✕ 65(H)mm Weight 1.1kg (Excluding packaged goods) RS-485 Connector No 3 (Yellow) : DATA "+", No 5(Red) : DATA "-" D-SUB Connector No 2 : DATA "+", No 3 : DATA "-" 23