Samsung SSC-1000 User Guide - Page 8

SSC-1000 (gb) 2009.1.8 1:38 PM Page 12 User's Guide 3. Installation and Connection MATRIX IN RX OUT DC 9V 0.6A MATRIX SWITCHER ADAPTOR SAMSUNG DOME CAMERA /RECEIVER UNIT/MULTIPLEX MATRIX IN RX OUT DC 9V 0.6A CONTROLLER 1) Connect the RS-485 Cable. Connect the Samsung Dome Camera, Multiplex or the RS-485 cable of the receiver unit to the out terminal, and connect the RS-485 cable of a different controller to the RX in terminal, the RS-485 cable of the Matrix Switcher to the matrix terminal. For the RX terminal, number 3 (yellow) is DATA "+" and number 5(red) is DATA "-". For the matrix terminal, number 2 is DATA "+" and number 3 is DATA "-". 2) Put in the DC 9V power. 12 4. Setting and Manipulating 1) Setting ! In order to enter into the set-up mode in the initial state, press the MENU button. MON = [ 0 0 ] CAM=[ 0 0 0 ] MANUAL SELECT MANUAL @ If you press the MENU button, words that ask for the password get indicated in LCD, and if you put in the password, the main menu gets indicated. When it is in password disable, it immediately enters the main menu. INPUT PASSWORD [ ] # Select the item you want to set up from the main menu. Moves of items are done by the "↑" and "↓" buttons, and for selection, if you press the ENTER button, you enter the set-up menu of the item you desire. If you press on the MENU button in the main menu state, you can come out of the set-up mode. → CONTROLLER SET CAMERA SET SYSTEM INFO $ CONTROLLER SET If you select the controller set in the main menu, you can make set-ups related to the controller. Moves of items are done by the "↑" and "↓" buttons, and for selection, you can press the ENTER button. When you come out of the controller menu, press the MENU button. → PASSWORD SET BAUDRATE: 9600 PROTOCOL: SAMSUNG ADDRESS NO [ 0 ] 13