Samsung SSC-1000 User Guide - Page 6

SSC-1000 (gb) 2009.1.8 1:38 PM Page 8 User's Guide 2. Names and Functions of Each Parts SAMSUNG 1) LCD This indicates the action state of the System Controller. 2) 0~9 The Camera is used when designating the Monitor Number, PRESET, and the PATTERN Number. 2 to 4 to 6 to 8 is used when moving an item in the Menu set-up mode or when changing the set-up value. It is used when you need to input the address number or camera select in the Multiplex control mode. Then you press the "ENTER" button after selecting one. 3) CAM This is used when selecting the address number of the Samsung Dome Camera or the receiver unit, and the input channel of the address number. It is switched to the Camera control mode when you press the button in the Multiplex control mode. 8 → 4) MON This is used when selecting the output channel of the Matrix Switcher. It is used to select an address number in the Multiplex control mode. 5) Joy Stick This is used when the actions of the Pan/Tilt connected to the Samsung Dome Camera or the Receiver Unit is moved UP, DOWN, LEFT, or RIGHT. It is equivalent to "MOVE button in the Multiplex control mode. 6) CLOSE/OPEN, NEAR/FAR, and TELE/WIDE This is used when controlling the actions of the IRIS, FOCUS, and ZOOM of the zoom lens connected to the Samsung Dome Camera or the Receiver Unit. 7) MENU This is used when entering or coming out of the set-up mode for various types of set-ups. When you enter the set-up mode LED gets turned on, and when you come out LED gets turned off. It is equivalent to "MENU" button in the Multiplex control mode. 8) PRESET This is used when searching for the PRESET position set up in the Samsung Dome Camera or the Receiver Unit. When the preset is in the selection mode LED gets turned on, and when you come out of the selection mode LED gets turned off. 9) PATTERN This is used when executing the PATTERN mode set up in the Samsung Dome Camera. When you select the PATTERN mode, LED gets turned on and when you come out LED gets turned off. 10) SCAN This is used when consecutively scanning the PRESET set up in the Samsung Dome Camera. When the scan mode is selected, LED gets turned on and when you come out LED gets turned off. 9 → →