Samsung TXH1970 Owners Manual - Page 15

INSTALLATION Connecting VHF and UHF antennas, continued Connecting cable TV Antennas with 75-ohm round leads 1 Plug the lead into the terminal on the bottom of the rear panel. Choose one of the sections below for connecting a cable system.  This TV is cable-ready; you don't need a converter for basic cable channels. Cable without a Converter Box To connect cable without a converter box: 1 Plug the incoming cable into the TV's antenna terminal. Separate VHF and UHF antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires a combiner attachment. You'll find the type of combiner you need at an electronics store. 1 Connect both antenna leads to the combiner. Cable with a Converter Box To connect cable with a converter box to descramble channels: 1 Find the cable that is connected to the ANTENNA OUT (also named ANT OUT, VHF OUT, or, OUT) terminal on your converter box. 2 Connect the other end of this cable to the TV's antenna terminal. Plug the combiner into the terminal on the bottom of the rear panel.  If you only need to use the cable box to descramble a few channels, contact your cable company for suggestions on alternate connections. CHAPTER TWO: INSTALLATION 11