Samsung WF435ATGJWR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 20
Step 4
View all Samsung WF435ATGJWR/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
installing your washer STEP 4 Calibration mode Before using Calibration mode, be sure to take out all items from the drum. Your Samsung washer automatically detects the weight of the laundry. For more accurate weight detection, please run Calibration Mode after the installation. Calibration mode is performed by following the steps below. 1. Turn on the washer. 2. Press the Temp. button and Delay Start button simultaneously at least 3 seconds. 3. Remove any contents in the tub and close the door. 4. Press the Start/Pause button to run Calibration Mode. 5. The drum rotates clockwise and counterclockwise approximately for for approximately 3 minutes. 6. When Calibration Mode is finished, the "En/End" appears on the display and the washing machine turns off automatically. The washing machine is now ready for use. 20_ installing your washer WF435A-03159B_EN_20120619.indd Sec3:20 2012-06-19 8:16:51