Samsung WF435ATGJWR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 26
Spin Only, Drum Light, Garment, My cycle
View all Samsung WF435ATGJWR/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
washing a load of laundry Spin Only If you press the Power button and then press and hold the Spin button for 2 seconds, the spin time will be displayed on the display panel. Then, press the Spin button repeatedly until the required spin level is selected, and then press the Start/Pause button. Before pressing the Spin Only button, you can select a cycle with the Cycle Selector. If you have selected a cycle, you can only select the corresponding spin level. Drum Light 1. If the door is opened when the power is on, the Drum Light is automatically turned on. 2. If the door is closed when the power is on, the Drum Light is automatically turned off. 3. Press the Temp. and the Spin buttons simultaneously to turn the Drum Light on or off. 4. If 4 minutes have passed after the Drum Light is turned on, the Drum Light is automatically turned off. Garment+ You can add or take out laundry items even after the wash has started, as long as the "Garment+" light is on. Pushing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your Washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the Start/Pause button. My cycle Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button convenience. By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The "My Cycle" light will indicate activation. You can select all options as follows in "My Cycle" mode. 1. Select cycle using the Cycle Selector dial. 2. After cycle selection, set each option. See page 41 for available option settings with each cycle. 3. Then, you can start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode. The cycle and options you select will be displayed the next time you choose "My Cycle". You can change the "My Cycle" settings by repeating the same process above. The last used setting will be displayed the next time you choose "My Cycle". 26_ washing a load of laundry WF435A-03159B_EN_20120619.indd Sec5:26 2012-06-19 8:16:52