Samsung WF435ATGJWR/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 32

maintaining your washer - storage

Page 32 highlights

maintaining your washer CLEANING THE DISPENSERS The automatic dispenser may need to be cleaned periodically due to laundry additive buildup. 1. Pull the detergent liquid holder out of the detergent compartment. 1 2. Remove the siphon cap from the fabric softener and bleach compartments. 3. Wash all of the parts under running water. 4. Clean the dispenser recess with a soft brush. 5. Reinsert the siphon cap and push it firmly into place. 6. Push the dispenser back into place. 7. Run a Rinse+Spin cycle without any load in your washer. 2 Siphon cap STORING YOUR WASHER Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare your Washer for storage as follows: • Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your Washer through the cycle without a load. • Turn the water faucets off and disconnect the inlet hoses. • Unplug your Washer from the electrical outlet and leave your Washer door open to let air circulate inside the tumbler. • If your Washer has been stored in below-freezing temperatures, allow time for any leftover water in your Washer to thaw out before use. 32_ maintaining your washer WF435A-03159B_EN_20120619.indd Sec4:32 2012-06-19 8:16:52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144

32_
maintaining your washer
CLEANING THE DISPENSERS
The automatic dispenser may need to be cleaned periodically due to laundry additive buildup.
1.
Pull the detergent liquid holder out of the detergent compartment.
2.
Remove the siphon cap from the fabric softener and bleach
compartments.
3.
Wash all of the parts under running water.
4.
Clean the dispenser recess with a soft brush.
5.
Reinsert the siphon cap and push it firmly into place.
6.
Push the dispenser back into place.
7.
Run a
Rinse+Spin
cycle without any load in your washer.
STORING YOUR WASHER
Washers can be damaged if water is not removed from hoses and internal components before storage.
Prepare your Washer for storage as follows:
Select the Quick Wash cycle and add bleach to the automatic dispenser. Run your Washer through the
cycle without a load.
Turn the water faucets off and disconnect the inlet hoses.
Unplug your Washer from the electrical outlet and leave your Washer door open to let air circulate inside
the tumbler.
If your Washer has been stored in below–freezing temperatures, allow time for any leftover water in your
Washer to thaw out before use.
maintaining your washer
1
2
Siphon cap
WF435A-03159B_EN_20120619.indd Sec4:32
WF435A-03159B_EN_20120619.indd
Sec4:32
2012-06-19
8:16:52
2012-06-19
8:16:52