Sanyo CE42LM4WPN-NA Owner's Manual for POA-LN01 - Page 14
Con the network with the computer
UPC - 086483065156
View all Sanyo CE42LM4WPN-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Configure the network with the computer This example explains how to set the following configuration. IP Address : 172.21.95.224 Subnet Mask : 255.255.255.0 Default Gateway : 172.21.95.1 DNS : 172.21.1.53 The default network configuration is set as follows. IP Address Subnet Mask Default Gateway DNS : 192.168.0.2 : 255.255.255.0 : 0.0.0.0 : 0.0.0.0 Make sure that the monitor is connected to the network and then connect the AC cord to the outlet. 1 Temporarily*1 set up your computer network configuration to the same IP network number as the PJ-Net Organizer. For example, change your computer network configuration as follows and restart the computer. IP Address Subnet Mask Default Gateway DNS : 192.168.0.5 : 255.255.255.0 : (blank) : (blank) The network configuration of computer differs depending on each network environment or your computer. For further information, please see the chapter "Configure the network of computer" on page 17. *1 Change your computerʼs network configuration temporarily. After completing the set up for the monitor, you must set up again to the original network configuration for your computer. It is recommended to make a note of those network settings. 14