Sanyo DP26648 Service Manual - Page 9

CHASSIS ELECTRICAL PARTS LIST CAUTION: To Protect against electrical shock and for continued product safety, refer to SAFETY PRECAUTIONS, and PRODUCT SAFETY NOTICE on Page 2. PRODUCT SAFETY NOTICE PRODUCT SAFETY SHOULD BE CONSIDERED WHEN A REPLACEMENT IS MADE IN ANY AREA OF A RECEIVER. COMPONENTS INDICATED BY A IN THIS PARTS LIST AND THE SCHEMATIC DIAGRAM DESIGNATE COMPONENTS IN WHICH SAFETY CAN BE OF SPECIAL SIGNIFICANCE. IT IS PARTICULARLY RECOMMENDED THAT ONLY PARTS DESIGNATED ON THE FOLLOWING PARTS LIST BE USED FOR COMPONENT REPLACEMENT DESIGNATED BY A . NO DEVIATIONS FROM RESISTANCE, WATTAGE, AND VOLTAGE RATINGS MAY BE MADE FOR REPLACEMENT ITEMS DESIGNATED BY A . Note: Schematic part location numbers may not always match with the part descriptions. The part descriptions are correct and should be used. CAPACITORS NOTES: Read description of the Capacitor as follows: (Example) CERAMIC 100P K 50V Rated Voltage Tolerance Symbols: Less than 10pF A : Not specified B : ±0.1pF C : ±0.25pF D : ±0.5pF E : +0 -1pF F : ±1PF G : ±2pF H : +0.1 -0pF L : +0 -0.1pF R : ±0.25 -0pF S : +0-0.25pF More than 10pF A :Not specified D : ±0.5% H :±3% L :±15% P :+100-0% U :+75-10% X :+40-20% B : ±0.1% C : ±0.25% F : ±1% G : ±2% J :±5% K :±10% M :±20% N :±30% Q :+30-10% T :+50-10% V :+20-10% W :+100-10% Y :+150-10% Z : +80-20% Rated value: P=pico farad, U=micro farad Material: CERAMIC........... Ceramic MT-PAPER......... Metallized Paper POLYESTER...... Polyester MT-POLYEST.....Metallized Polyester POLYPRO.......... Polypropylene MT-POLYPRO.... Metallized Polypropylene COMPO FILM..... Composite Film MT-COMPO........ Metallized Composite STYRENE........... Styrene TA-SOLID........... Tantalum Solid AL-SOLID........... Aluminium Solid ELECT Electrolytic NP-ELECT.......... Non-polarised Electrolytic OS-SOLID.......... Aluminium Solid with Organic Semiconductive Electrolytic RESISTORS NOTES: Read description of the Resistor as follows: (Example) CARBON 4.7K J A 1/4W Rated Wattage Performance Symbols: A...General B...Non-flammable Z...Low noise Other... Temperature coefficient Tolerance Symbols: A...0.05% B...0.1% C...25% D...0.5% F...1% G...2% J...5% K...10% M...20% P...+5 -15% Rated Value, ohms: K...1,000 M...1,000,000 Material: CARBON Carbon MT-FILM Metal Film OXIDE-MT ...........Oxide Metal Film SOLID Composition MT-GLAZE ...........Metal Glaze WIRE WOUND .....Wire Wound CERAMIC RES .... Ceramic FUSIBLE RES ..... Fusible -9-