Sanyo DS32224 Owners Manual - Page 10
Remote Control Keys Continued, Programming The Remote Control - remote codes
View all Sanyo DS32224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
REMOTE CONTROL KEYS (Continued) 11 1` 2 Sleep Key-Press this key, then press the "0" key to set the Sleep Timer. The desired time can be set from 30 minutes up to 3 hours in 30 minutes increments. Sleep Timer will switch off the TV automatically. Note: The Sleep Timer cancels when the TV is turned off or if a power failure occurs. 13 Recall Key-Select a channel then select another channel using the number keys. Press Recall to switch between the channels. 14 Display Key-Press once to display the channel 12 number. Press twice to display the channel number continuously. Press again to remove the display. 13 PROGRAMMING THE REMOTE CONTROL 14 Power Key-Press to turn TV on or off. 11 Reset Key-Press this key twice to restore factory set- tings. The TV will automatically start Channel Search and clear all customized settings. These features will automatically reset: • Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color Enhancer, Tone, and Surround Sound • Channel Memory • Audio to Stereo • Caption to OFF • V-Guide to OFF • Aspect Ratio to 4:3 (normal) • Menu Language to English • Sleep Timer (if previously set) • Video to TV (if previously set) If desired, personal settings can be made again using the menu options. Find your VCR, Cable Box, and DVD Player brand codes in the charts on page 11. Press and hold the VCR or AUX (Auxiliary) mode key while entering a three-digit code number. Then release the mode key. If the code was accepted, the mode key will flash 5 times after it is released. If you entered an invalid code, the mode key will not flash. Check the code number and repeat Step 2. After entering each code number check the unit's operation by pressing the POWER and/or CHANNEL keys. If these keys operate your equipment, you have probably entered the correct code number for that device. If not, follow Step 2 and enter another code, if available. Perform Steps 1 and 2 for each piece of equipment you have. The VCR mode will accept only VCR codes. The AUX mode will accept code types for DVD Players, Cable Boxes, or a second VCR, but only one code at a time. For programmed key functions, see chart on page 12. After you have programmed the remote control and confirmed its operation, enter your codes in the spaces provided below for easy reference. VCR Code: Cable Box Code: DVD Player Code: 10 Programming the Remote Control