Sanyo PDG-DWL2500 Owners Manual

Sanyo PDG-DWL2500 - 2500 Lumens Manual

Get Sanyo PDG-DWL2500 - 2500 Lumens PDF manuals and user guides
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DWL2500 manual content summary:

  • Sanyo PDG-DWL2500 | Owners Manual - Page 1
    Multimedia Projector MODEL PDG-DWL2500 3D Ready • DLP® Link and IR format compatible Network Supported Refer to the Owner's Manual below for details about network function. • Network Set-up and Operation Owner's Manual
  • Sanyo PDG-DWL2500 | Owners Manual - Page 2
    © SANYO Electric Co., Ltd. 2010 Trademarks • D LP is a registered trademark of Texas Instruments. BrilliantColor and DynamicBlack are trademarks of Texas Instruments. • HDMI, the HDMI logo and
  • Sanyo PDG-DWL2500 | Owners Manual - Page 3
    for portability, durability, and ease of use. u Large Screen in Limited Space Short focus lens allows you to project large images from short distance. (p.15) u 3D Display Function This projector is capable of displaying 3D video with the Frame Sequential Format*, and you can view the dynamic
  • Sanyo PDG-DWL2500 | Owners Manual - Page 4
    Resetting the Filter Counter 65 Cleaning the Projection Window 66 Cleaning the Projector Cabinet 66 Lamp Replacement 67 Resetting the Lamp Counter 68 Appendix 69 Troubleshooting 69 Menu Tree 72 Indicators and Projector Condition 74 Compatible Computer Specifications 75 Technical
  • Sanyo PDG-DWL2500 | Owners Manual - Page 5
    this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT
  • Sanyo PDG-DWL2500 | Owners Manual - Page 6
    Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo PDG-DWL2500 | Owners Manual - Page 7
    or dust that has accumulated on the projector. If the projector reaches a time set in the timer setting, a Filter warning icon (Fig. 1) appears on the screen, indicating that the filter replacement is necessary. Blocking the air vents and leaving the projector uncleaned for a long time may not only
  • Sanyo PDG-DWL2500 | Owners Manual - Page 8
    Safety Instructions Installing the Projector in Proper Position Install the projector properly. Improper installation may reduce the lamp life and cause fire hazard. Do not roll the projector more than 10 degrees from side to side. 10˚ 10˚ Do not roll the projector more than 5 degrees from side to
  • Sanyo PDG-DWL2500 | Owners Manual - Page 9
    the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PDG-DWL2500 Trade Name : Sanyo Responsible party : SANYO NORTH AMERICA CORPORATION Address : 21605 Plummer
  • Sanyo PDG-DWL2500 | Owners Manual - Page 10
    the infrared remote receiver is put on the wall or floor directly, the infrared remote receiver may damage. e Lamp Cover (Lamp and Air Filter) r Connection Terminal is for the Network function. Refer to the owner's manual of "Network Set-up and Operation". [ Kensington Security Slot This
  • Sanyo PDG-DWL2500 | Owners Manual - Page 11
    projector with RS-232C, connect the control equipment to this connector with the serial control cable. i 3D SYNC OUT Connect a 3D sync. signal cable for an IR wireless emitter to this jack (p.48) o LAN Connection Terminal Connect the LAN cable (refer to the owner's manual
  • Sanyo PDG-DWL2500 | Owners Manual - Page 12
    projector exceeds the operating range (pp. 64, 74). e LAMP REPLACE indicator Turn yellow when the life of the projection lamp draws to an end (pp. 67, 74). r 3D indicator Turn blue when the projector is in 3D Point ed buttons) (p.25). !1 Infrared Remote Receiver The protruding shape allows wide-angle
  • Sanyo PDG-DWL2500 | Owners Manual - Page 13
    Remote Control Part Names and Functions ① ON/STAND-BY button Turn the projector on or off. (pp.2022) ② AUTO ) ⑭ IMAGE button Select the image mode. (pp.29, 36) ⑮ 3D button Operate the 3D function. (pp.48-49) ⑯ LAMP button Select a lamp mode. (pp.28, 58) ⑰ P-TIMER button Operate the P-timer function
  • Sanyo PDG-DWL2500 | Owners Manual - Page 14
    of an explosion if battery is replaced by an incorrect type. l Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. See
  • Sanyo PDG-DWL2500 | Owners Manual - Page 15
    should be set perpendicularly to the plane of the screen. A B C Screen E D 4Note: • This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
  • Sanyo PDG-DWL2500 | Owners Manual - Page 16
    • VGA cables (Mini D-sub 15 pin) * • Audio cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector.) External Audio Equipment Monitor Audio Output Output Monitor Output or Monitor Input DVI Output Audio Input VGA cable Audio cable (stereo) VGA cable
  • Sanyo PDG-DWL2500 | Owners Manual - Page 17
    Equipment Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector. ) External Audio Equipment Video and Audio Output S-video Output (Video) (L) (R) Audio Input Installation Video and audio S-video cable cable Audio
  • Sanyo PDG-DWL2500 | Owners Manual - Page 18
    used for connection • Audio cables • Scart-VGA cable • Component cable • Component-VGA cable • HDMI cable (Cables are not supplied with this projector.) Monitor Output Signal Table Input Terminal COMPUTER 1/ COMPONENT D-sub15 RGB (PC analog) Y, Pb/Cb, Pr/Cr RGB (SCART) COMPUTER 2 D-sub15 RGB
  • Sanyo PDG-DWL2500 | Owners Manual - Page 19
    being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning it on . Projector side AC outlet side For the U.S.A. and Canada For Continental Europe For the U.K. Ground Ground To power cord connector on your projector.
  • Sanyo PDG-DWL2500 | Owners Manual - Page 20
    for Lamp control status.) 4Note: The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector. Video / PC selection window If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on
  • Sanyo PDG-DWL2500 | Owners Manual - Page 21
    the number in a column on page 80 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center. PIN Code Input Dialog Box After the OK icon disappears, you can operate the projector. 4Note: • If the PIN code number is not entered
  • Sanyo PDG-DWL2500 | Owners Manual - Page 22
    AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS. Direct OFF Function You can disconnect the power cord from the wall
  • Sanyo PDG-DWL2500 | Owners Manual - Page 23
    The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Remote Control
  • Sanyo PDG-DWL2500 | Owners Manual - Page 24
    ⑨ Network ⑩ Guide Used to select projector's operating configurations. (pp.50-62) Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock, Remote control, and SERIAL NO.. (p.63) See owner's manual
  • Sanyo PDG-DWL2500 | Owners Manual - Page 25
    screen, press the SELECT button. Arrow marks displayed on the screen. 3 Press the Point ed7 8 buttons on the top control or the remote control to adjust the image position. Zoom +/- ZOOM +/- buttons Zoom +/- disappears after 4 seconds. Screen Image 4Note: • Zoom and Image Position Adjustment
  • Sanyo PDG-DWL2500 | Owners Manual - Page 26
    the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.34-35) Remote Control Keystone Correction Press the KEYSTONE button on the remote control or on the top control. The Keystone dialog box appears. Use the Point ed
  • Sanyo PDG-DWL2500 | Owners Manual - Page 27
    or on the top control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Remote Control Mute Press the MUTE button on the remote control to select On to temporarily turn off the sound. To turn the sound back on, press the MUTE button again to
  • Sanyo PDG-DWL2500 | Owners Manual - Page 28
    . LAMP button Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen. Normal....... Normal brightness. Eco Lower brightness reduces the lamp power consumption and extends the lamp life. 3D button Select 3D mode from 3D Off, 3D (Sync. 1) and 3D
  • Sanyo PDG-DWL2500 | Owners Manual - Page 29
    remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as User same time. P-TIMER button Press the P-TIMER button on the remote control. The Timer display "00 : 00" appears on the screen
  • Sanyo PDG-DWL2500 | Owners Manual - Page 30
    control. Before using these buttons, correct input source should be selected through Menu operation as described below. Remote Control COMPUTER 1 button Computer 1(RGB) Computer 1(Scart) Input Menu Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point ed
  • Sanyo PDG-DWL2500 | Owners Manual - Page 31
    Computer Input Input Source Selection (Computer 2: RGB) Direct Operation Choose Computer 2 (RGB) by press the COMPUTER 2 button on the remote control. Remote Control COMPUTER 2 button Computer 2 (RGB)* 4Note: * C OMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal
  • Sanyo PDG-DWL2500 | Owners Manual - Page 32
    is required. (pp.34-35) There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 69.) The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10. (pp.34-35) PC Systems
  • Sanyo PDG-DWL2500 | Owners Manual - Page 33
    adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35). • The Auto PC adjustment can
  • Sanyo PDG-DWL2500 | Owners Manual - Page 34
    enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use the
  • Sanyo PDG-DWL2500 | Owners Manual - Page 35
    10 in which you want to store, and then press the SELECT button. This Mode has stored parameters. 4Note: • When input computer signal to the projector, PC adjust will become available. Values of Total dots, Horizontal, and Vertical. Store Menu Vacant Press MENU button to close this dialog box
  • Sanyo PDG-DWL2500 | Owners Manual - Page 36
    Image 3, and Image 4 by pressing the IMAGE button on the remote control. Remote Control Menu Operation 1 Press the MENU button to display the On-Screen in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Cinema Picture mode
  • Sanyo PDG-DWL2500 | Owners Manual - Page 37
    Use the Point 7 8 buttons to adjust the setting value. 4Note: • When White balance Red, Green or Blue is adjusted, Color temp. will change to User. Store Menu Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments
  • Sanyo PDG-DWL2500 | Owners Manual - Page 38
    over the screen. True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector automatically switches to the panning mode. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows turn red. When reached to the
  • Sanyo PDG-DWL2500 | Owners Manual - Page 39
    Input Custom adj. Adjust the screen scale and position manually with this function. Press the Point 8 button projected image can be also compressed by pressing the D.ZOOM d or the SELECT button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ed and the
  • Sanyo PDG-DWL2500 | Owners Manual - Page 40
    . This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be 16:9 projection screen. Default(16:10).... 16:10 is the aspect of the DLP chip. The original Screen Menu is available. Colorboard Press the Point 8 button at
  • Sanyo PDG-DWL2500 | Owners Manual - Page 41
    Input Source Selection (Video, S-video) Direct Operation Choose Video or S-video by pressing the VIDEO button or the S-VIDEO button on the remote control. Remote Control VIDEO button Video S-VIDEO button S-video Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point
  • Sanyo PDG-DWL2500 | Owners Manual - Page 42
    Choose Computer 1(Component) or Computer 1(Scart) by pressing the the COMPONENT or COMPUTER 1 button on the remote control; choose HDMI by pressing the HDMI button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below
  • Sanyo PDG-DWL2500 | Owners Manual - Page 43
    Image 3, and Image 4 by pressing the IMAGE button on the remote control. Remote Control Menu Operation 1 Press the MENU button to display the On-Screen in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Cinema Picture mode
  • Sanyo PDG-DWL2500 | Owners Manual - Page 44
    to deepen blue tone (from 0 to 63). 4Note: • When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to User. • Tint can not be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.43). 44
  • Sanyo PDG-DWL2500 | Owners Manual - Page 45
    Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To and Progressive can not be selected when the input signal is 480p, 575p, 720p or 3D mode is set to On. • Film of Progressive cannot be selected when the input
  • Sanyo PDG-DWL2500 | Owners Manual - Page 46
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which Custom Provide the last stored aspect screen image. Custom adj. Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom adj. and the Custom adjustment menu
  • Sanyo PDG-DWL2500 | Owners Manual - Page 47
    . This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to On, the picture will be 16:9 projection screen. Default(16:10).... 16:10 is the aspect of the DLP chip. The original Screen Menu is available. Colorboard Press the Point 8 button at
  • Sanyo PDG-DWL2500 | Owners Manual - Page 48
    compatible glasses, follow these steps: LCD Glasses with DLP Link compatible 1. Turn on the projector and the 3D glasses. 2. Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function. When 3D mode is in On, 3D indicator turns blue. 3. If you see a discrete
  • Sanyo PDG-DWL2500 | Owners Manual - Page 49
    sleep or have been drinking alcohol. TROUBLESHOOTING FOR 3D DISPLAY Symptoms 3D contents appear as 2D. 3D image is inverted. (3D image is not correct.) Image of glasses has flicker. Glasses does not turn on. Possible problems Solution The glasses or the projector are set Change the setting of
  • Sanyo PDG-DWL2500 | Owners Manual - Page 50
    Setting Setting This projector has a Setting Menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu.
  • Sanyo PDG-DWL2500 | Owners Manual - Page 51
    on the remote control. On 2....... Input search works under the following situation. - When turning on the projector by pressing the is set to On 1 or On 2, the status of Input and Lamp are displayed every time the signal is switched. • Only the last manual adjustments are required (pp.34-35). 51
  • Sanyo PDG-DWL2500 | Owners Manual - Page 52
    right-eye image and left-eye image are switched or you feel like you cannot get 3D effect due to out-ofsynchronization state, first try to synchronize the projector with the 3D glasses by using 3D SYNC function. 3D setting Zoom This function is used to memorize the Zoom adjustment with the ZOOM
  • Sanyo PDG-DWL2500 | Owners Manual - Page 53
    to switch between each option. Blue . . . Project a blue background. User . . Project an image captured in the Logo setting. Black . . Project when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
  • Sanyo PDG-DWL2500 | Owners Manual - Page 54
    projected image. After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector. To cancel the capture function, select Yes in the "Quit?" confirmation box. 4Note: • Before capturing an image
  • Sanyo PDG-DWL2500 | Owners Manual - Page 55
    Enter a Logo PIN code Use the Point ed buttons to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to [. If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and
  • Sanyo PDG-DWL2500 | Owners Manual - Page 56
    cables for audio. * This HDMI terminal supports Linear PCM (32kHz/44.1kHz/48kHz). projector status while the projector is powered off. Eco Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the owner's manual
  • Sanyo PDG-DWL2500 | Owners Manual - Page 57
    For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready When the lamp has been fully cooled down, the POWER indicator changes
  • Sanyo PDG-DWL2500 | Owners Manual - Page 58
    you to change brightness of the screen. Normal....... Normal brightness. Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Remote control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code
  • Sanyo PDG-DWL2500 | Owners Manual - Page 59
    unlock, use the remote control. Lock the operation of the remote control. To unlock, remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Setting PIN code lock This function prevents the projector
  • Sanyo PDG-DWL2500 | Owners Manual - Page 60
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number ([[[[) will turn red for a moment. Enter the correct PIN code all over again
  • Sanyo PDG-DWL2500 | Owners Manual - Page 61
    cooling fans properly may affect the projector life. Lamp counter This function is used to display the cumulative lamp operating time and reset the lamp counter. When the total lighting time of a lamp exceeds the recommended total hours of use, the Lamp replacement icon (Fig.1) will appear on the
  • Sanyo PDG-DWL2500 | Owners Manual - Page 62
    . Timer To set a timer, when the projector reaches the time, the Filter warning icon (Fig.1) appears on the screen and the total accumulated time turns red, indicating that the filter replacement is necessary. Filter counter reset... After replacing the filter, be sure to reset the timer. The
  • Sanyo PDG-DWL2500 | Owners Manual - Page 63
    lamp operating time is displayed. Off, Ready, Shut down or Timer is displayed. The selected Key lock icon is displayed. Off or On 1 or On 2 is displayed. The selected remote code is displayed. The serial number of the projector is displayed. The serial number is used to service the projector
  • Sanyo PDG-DWL2500 | Owners Manual - Page 64
    projector away from the duct or vent. - Is the filter clean? Replace the filter with a new one. The projector is shut down and the WARNING TEMP. indicator lights red. When the projector AC power cord and contact the service center. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED
  • Sanyo PDG-DWL2500 | Owners Manual - Page 65
    buildup and adversely affect the life of the projector. If a "Filter warning" icon appears on the screen, replace the Filter immediately. Replace the filter by following the steps below. 1 Turn off the projector, and unplug the AC power cord from the AC outlet. Lamp Cover 2 First, clean up the
  • Sanyo PDG-DWL2500 | Owners Manual - Page 66
    its vicinity. The explosion or fire hazard may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the flammable air spray but also by
  • Sanyo PDG-DWL2500 | Owners Manual - Page 67
    next page. Handle ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. l Model No. of your projector l Replacement Lamp Type No. : PDG-DWL2500 : POA-LMP143 (Service Parts No. 610 351
  • Sanyo PDG-DWL2500 | Owners Manual - Page 68
    the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator
  • Sanyo PDG-DWL2500 | Owners Manual - Page 69
    Filter warning icon or the Lamp replacement icon. or Lamp mode icon appears No image q Check the connection between your computer or video equipment and the projector for monitor output when connecting to a projector. See your computer's instruction manual for the setting. q It takes about 30
  • Sanyo PDG-DWL2500 | Owners Manual - Page 70
    the projector off and wait until condensation evaporates. q Check if the Contrast or Brightness is adjusted properly. q Check if Image mode is selected properly. q Check the lamp control function. q Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching. Replace the lamp
  • Sanyo PDG-DWL2500 | Owners Manual - Page 71
    Unable to unlock the Logo PIN q Contact the dealer where you purchased the projector or the code lock or Security PIN code service center. lock. There are some trouble about q The troubleshooting about 3D display function is described on 3D display function. page 49. Pages 27 27 74 56 30, 40-41
  • Sanyo PDG-DWL2500 | Owners Manual - Page 72
    Appendix Menu Tree Computer Input/HDMI Input/Video Input Input Input Computer 1 Computer 2] HDMI Video S-video RGB Component RGB (Scart) RGB ] COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output. Sound Sound Volume Mute 0-63 On / Off
  • Sanyo PDG-DWL2500 | Owners Manual - Page 73
    3D -> 2D On / Off 3D phase 0 - 31 Reset / Store1 / Store2 Blue / User / Black On / Countdown off / Off Logo select Off / Default / User Lamp control Remote Lamp counter Filter counter Off / On 1 / On 2 Lamp counter Lamp counter reset Filter counter H Timer Off/2000H/3000H/4000H Filter
  • Sanyo PDG-DWL2500 | Owners Manual - Page 74
    power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. The lamp has been used overtime. Replace the lamp v immediately and then reset the lamp counter. The indicator will be turned off after
  • Sanyo PDG-DWL2500 | Owners Manual - Page 75
    600 86.000 3D DIPLAY 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 - ON-SCREEN RESOLUTION DISPLAY SXGA 14 SXGA 4 SXGA 16 SXGA 17 SXGA 18 SXGA 3 SXGA 20 SXGA+ 1 SXGA+ 2 SXGA+ 2 SXGA+ 4 SXGA+ 5 SXGA+ 6 SXGA+ 7 MAC 21 MAC WXGA 3 WXGA 6 WXGA 7 WXGA 8 WXGA 9 WXGA 10 WXGA 11 WXGA 13 WXGA 14 WXGA 15 WUXGA
  • Sanyo PDG-DWL2500 | Owners Manual - Page 76
    XGA D-WXGA 3 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-WXGA 11 D-WXGA 13 D-WXGA 14 D-WXGA 15 D- 3D image can be projected. • Alphabet letter "i" placed beside some of the resolutions represents interlace signal. • The specifications while the projector is running. If the cable has been
  • Sanyo PDG-DWL2500 | Owners Manual - Page 77
    Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment DLP Chip Projection System Number of Pixels Signal Compatibility Color System SD/HDTV Signal Input Scanning Frequency Optical Information Projection Image Size (Diagonal) Throw Distance
  • Sanyo PDG-DWL2500 | Owners Manual - Page 78
    for low ceiling) : POA-CHL-PL02 (for high ceiling) : POA-CHB-DWL2500 PJ Link Notice This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified
  • Sanyo PDG-DWL2500 | Owners Manual - Page 79
    87654321 1 TX+ 2 TX- 3 RX+ 4 - - - 5 - - - 6 RX- 7 - - - 8 - - - CONTROL PORT CONNECTOR (D-sub 9 pin) Serial 1 - - - 2 RXD 3 TXD 4 - - - 5 SG 6 - - - 7 - - - 8 - - - 9 - - - 3D SYNC OUT CONNECTOR (Mini DIN 3 pin) 1 +5VDC 2 Ground 3 Stereo Sync HDMI (19 PIN Type
  • Sanyo PDG-DWL2500 | Owners Manual - Page 80
    Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo PDG-DWL2500 | Owners Manual - Page 81
    Dimensions Appendix Unit: inch(mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.63(16.0) 4.95 (125.8) 4.10 (104.2) 4.51 (114.5) 4.25 (107.9) 11.46 (291.0) 4.61 (117.0) 15.16 (385.0) 8.94 (227.0) 3.07 (78.0) 3.05 (77.5) 12.64 (321.0) 5.30 (134.6) 6.69 (170.0) 7.01 (178.0) 0.39 (10.0)
  • Sanyo PDG-DWL2500 | Owners Manual - Page 82
    KG8AC
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Owner’s Manual
Multimedia Projector
MODEL
PDG-DWL2500
3D Ready
• DLP
®
Link and IR format compatible
Network Supported
Refer to the Owner's Manual below for
details about network function.
• Network Set-up and Operation