Sanyo PDG-DWL2500 Owners Manual - Page 48

D Display, For Viewing 3D Contents

Get Sanyo PDG-DWL2500 - 2500 Lumens PDF manuals and user guides
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

3D Display For Viewing 3D Contents To view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing equipment. For example, as for computer, when transmitting 3D signals from a computer to the projector, you also need to install the graphic card which has the capability to sequentially output the 3D frames at 120Hz and software in the computer. The 3D signal type which the projector can accept is frame sequential only. Other 3D signal types such as frame packing and side-by-side are not supported. As for 3D glasses, DLP Link format and IR emitter format are compatible with this projector. Compatibility with any other 3D glasses than the 2 types 3D glasses is not guaranteed. Using 3D Glasses with DLP Link compatible When using DLP Link compatible glasses, follow these steps: LCD Glasses with DLP Link compatible 1. Turn on the projector and the 3D glasses. 2. Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function. When 3D mode is in On, 3D indicator turns blue. 3. If you see a discrete or overlapping image, 3D Sync Invert function enables you to get the correct image. Press the 3D button to switch 3D Sync signal from among "3D Off", "3D (Sync 1)" or "3D (Sync 2)". 3D setting can also be selected from the menu (p.52). Remote Control 3D Mode 3D Off 3D (Sync 1) 3D (Sync 2) Using 3D Glasses with IR wireless emitter When using IR emitter system, follow these steps: 1. Turn off the projector. 2. Connect the sync cable for the IR emitter to 3D SYNC OUT terminal of the projector. 3. Turn on the projector, the IR emitter and the stereoscopic wireless LCD glasses. 4. Wear the 3D glasses and press the 3D button on the remote control to activate 3D Display function. 5. If you see a discrete or overlapping image, press the 3D button to switch 3D Sync signal from among 3D Off, 3D (Sync 1) or 3D (Sync 2). You can also invert the sync signal by using the switch on the IR emitter. 3D button Stereoscopic Wireless LCD Glasses Infrared Emitter 3D SYNC Input Sync Signal Cable (Supplied with the IR Emitter) 3D SYNC OUT 48 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
±8
3D Display
For Viewing 3D Contents
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Infrared Emitter
3D SYNC OUT
Sync Signal Cable
(Supplied with the IR Emitter)
Stereoscopic Wireless
LCD Glasses
3D SYNC Input
When using DLP Link compatible glasses, follow these
steps:
1. Turn on the projector and the 3D glasses.
2. Wear the 3D glasses and press the 3D button on the
remote control to activate 3D Display function.
When 3D mode is in On, 3D indicator turns blue.
3. If you see a discrete or overlapping image, 3D Sync
Invert function enables you to get the correct image.
Press the 3D button to switch 3D Sync signal from among
"3D Off", "3D (Sync 1)" or "3D (Sync 2)".
3D setting can also be selected from the menu (p.52).
3D Mode
3D Off
3D (Sync 2)
3D (Sync 1)
Remote Control
3D button
When using IR emitter system, follow these steps:
1. Turn off the projector.
2. Connect the sync cable for the IR emitter to 3D SYNC
OUT terminal of the projector.
3. Turn on the projector, the IR emitter and the stereoscopic
wireless LCD glasses.
4. Wear the 3D glasses and press the 3D button on the
remote control to activate 3D Display function.
5. If you see a discrete or overlapping image, press the 3D
button to switch 3D Sync signal from among 3D Off, 3D
(Sync 1) or 3D (Sync 2).
You can also invert the sync signal by using the switch on
the IR emitter.
Using 3D Glasses with DLP Link compatible
Using 3D Glasses with IR wireless emitter
LCD Glasses with DLP
Link compatible
To view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing
equipment. For example, as for computer, when transmitting 3D signals from a computer to the projector, you
also need to install the graphic card which has the capability to sequentially output the 3D frames at 120Hz and
software in the computer. The 3D signal type which the projector can accept is frame sequential only. Other 3D
signal types such as frame packing and side-by-side are not supported.
As for 3D glasses, DLP Link format and IR emitter format are compatible with this projector. Compatibility with
any other 3D glasses than the 2 types 3D glasses is not guaranteed.