Sanyo PDG-DWL2500 Owners Manual - Page 15

Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. A B C Screen E D 4Note: • This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. Make sure to check the position of images by projecting images on the screen before installing the projector and screen, since each projector shows slight variations. • M ake sure to project images on a flat screen. • E ven slight warpage or irregularities of the screen may have an effect on the quality of the projected images. Screen Size (W x H) mm 16:10 aspect ratio A B C D E 60" 1292 x 808 12.60" (32.0 cm) 9.06" (23.0 cm) -2.60" (-6.6 cm) 8.86" (22.5 cm) 1.85" (4.7 cm) 80" 1723 x 1077 16.14" (41.0 cm) 12.60" (32.0 cm) 0.95" (2.4 cm) 10.43" (26.5 cm) 3.43" (8.7 cm) 110" 2369 x 1481 21.46" (54.5 cm) 17.91" (45.5 cm) 6.26" (15.9 cm) 12.80" (32.5 cm) 5.79" (14.7 cm) Adjustable Feet Projection angle can be adjusted within -1.0 to +1.0 degree with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control or on the top control or select Keystone from the menu (See pages 26, 40, 47). Adjustable Feet 15