Sanyo PLC-XU355 Instruction Manual, PLC-XU355 - Page 74
When the input signal is digital from DVI terminal, refer to the chart below., depending on computers.
UPC - 086483073847
View all Sanyo PLC-XU355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Appendix When the input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 RESOLUTION 640 x 480 640 x 480 768 x 575 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1360 x 768 1366 x 768 1280 x 768 1280 x 768 H-Freq. (KHz) 31.47 31.47 31.25 37.879 43.363 48.36 47.7 48.36 56.160 46.500 47.776 60.289 V-Freq. (Hz) 59.94 59.88 50.00 60.32 60.00 60.00 60.00 60.00 72.000 50.000 59.870 74.893 ON-SCREEN DISPLAY D-SXGA1 D-SXGA2 D-SXGA3 D-720p D-720p D-1035i D-1080i D-1080i RESOLUTION 1280 x 1024 1280 x 1024 1280 x 1024 1280 x 720 1280 x 720 1920 x 1035 1920 x 1080 1920 x 1080 H-Freq. (KHz) 63.98 60.276 31.65 37.50 45.00 33.75 33.75 28.125 V-Freq. (Hz) 60.02 58.069 29.80 50.00 60.00 60.00 (Interlace) 60.00 (Interlace) 50.00 (Interlace) Note: • When the input signal is D-SXGA 1, D-SXGA 2 or D-SXGA 3, images may not be displayed properly depending on computers. • The specifications are subject to change without notice. 74