Sanyo PLC-XU47 Owners Manual - Page 13
Installation, Positioning the Projector, Adjustable Feet
View all Sanyo PLC-XU47 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Installation Positioning the Projector This projector is designed to project on a flat projection surface and can be focused from 4.3'(1.3m) - 32.8'(10.0m). Refer to the figure and the table below for the screen size and the distance between the projector and the screen. A:B = 9:1 32.8' (10.0m) 22.0' (6.7m) 16.4' (5.0m) 10.8' (3.3m) 4.3' (1.3m) 100" 40" 82" 150" 124" 200" 166" 300" (Inch Diagonal) Max. Zoom 247" Min. Zoom A (Center) 33" B Screen Size (W x H) mm 4 : 3 aspect ratio Zoom (min) Zoom (max) 33" 671 x 503 4.3' (1.3m) ----- 40" 813 x 610 5.2' (1.6m) 4.3' (1.3m) 100" 2032 x 1524 13.1' (4.0m) 10.8' (3.3m) 150" 3048 x 2286 20.0' (6.1m) 16.4' (5.0m) 200" 4064 x 3048 26.6' (8.1m) 22.0' (6.7m) 300" 6096 x 4572 ----- 32.8' (10.0m) ✔Note: • The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • The values shown above are approximate and may vary from the actual size. Adjustable Feet Projection angle can be adjusted up to 11.8 degrees with the adjustable feet. 1 Lift the front of the projector and pull upward the feet lock latches on both sides of the projector. 2 Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted by menu operation. (p22, 39) Adjustable Feet Feet Lock Latches 13