Sanyo PLC-XU47 Owners Manual - Page 37
Reset, Store, Progressive, Closes the Image Adjust Menu.
View all Sanyo PLC-XU47 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Progressive Interlaced video signal can be displayed in a progressive picture. Off . . . .Not activated. L1 . . . . .Select "L1" for an active picture. L2 . . . . .Select "L2" for a still picture. Film This function is effective on 3:2 pulldown video source. With this function On, the projector reproduces pictures faithful to the original film quality. Reset Resets all adjustment to their previous figure. Store To store the adjustment data, move the red frame pointer to the Store icon and press the SELECT button. The Image Level Menu will appear. Move the red frame pointer to the Image Level 1 to 4 and then press the SELECT button. Quit Closes the Image Adjust Menu. ✔Note: • Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. • Film can only be activated when selecting NTSC for Video System and L1/ L2 for Progressive. • 3:2 Pulldown or Telecine transfer is the process of changing images from film mode to video mode. While film runs at 24 frames per second (fps), NTSC television signals (or video) have a run rate of 30fps so the 24 fps film needs to be speeded up to 30fps and transferred using a proper field pattern to get the best film-like images. Video Input Image Level Menu Move the red frame pointer to an image icon to be set and then press the SELECT button. Store icon Video Input 37