Sanyo PLC-XU47 Owners Manual - Page 32

Video Input Input Source Selection (Video, S-Video) Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Video Computer 1 Computer 2 ✳ VIDEO button Video ✳ See Note on the bottom of this page. Menu Operation 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Input Menu icon. 2 Press the Point d button to move the red arrow pointer to Video and then press the SELECT button. The Source Select Menu will appear. 3 Move the pointer to the source that you want to select and then press the SELECT button. Auto When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order: 1st S-Video 2nd Video The S-VIDEO jack has priority over the VIDEO jack under the condition of connecting both the S-VIDEO jack and the VIDEO jack. Video When video input signal is connected to the VIDEO jack, select Video. S-Video When video input signal is connected to the S-VIDEO jack, select S-Video. Input Menu VIDEO Input Menu icon Move the pointer to Video and press the SELECT button. Source Select Menu (VIDEO) Move the pointer to the source that you want to select and press the SELECT button. ✔Note: When Monitor out is selected at the Terminal item in the Setting Menu, Computer 2 is not displayed. (p41) 32